Type 810 Magnetic level gauges Brooks Instrument - Brooks Instrument - #39

Text version of the page

Data Sheet DS-MLG-810-eng June, 2008 Magnetic level gauge Page 37 Type 810 4-20mA Output / Level transmitter Housings selection Type Standard IP65 Dimensions (Lxlxh) 80mm x 75mm x 57mm Material Aluminium Rod Ø 14mm 316L St. St. on ¾" NPT brass connection Connection PG9 Polyamid cable gland for Ø 5 à 9mm cables Protection IP65 – 4 screws cover Coating Polyester paint Type B4 – Explosion proof ("d") Dimensions (Lxlxh) See below drawing Material Aluminium Rod Ø 14mm 316L St. St. ¾" NPT Connection ¾"NPT Aluminium cable gland (Ø 5 à 12mm cables) (supplied) ATEX certified ("d") Protection IP65/IP66 – screwed cover Coating No – Raw Aluminium finish Certificate ATEX N° LCIE01ATEX6060X Marking*** II 2G EExdIICT6 Electrical data Supply Max.: 230V Current Max. : 15A Power Max. : 20W Temperature Ta = -40°C = +75°C Name plate Aluminium / St. St rivets Type Intrinsically safe ("ia")* Dimensions (Lxlxh) See below drawing Rod Ø 14mm 316L St. St. on ¾" NPT brass connection Connection PG9 Polyamid blue cable gland for Ø 5 à 8 m cables (EExe certified) Protection IP65 Coating Polyester paint Certificate ATEX N° LCIE05ATEX6034X Marking ** II 1 G EExiaIICT6/T5/T4 Electrical data Ui30V; li101mA; Pi758mW Or Ui28,4V; li116mA; Pi824mW Ci=0nF ; Li=0mH Temperature T6: Ta=50°Cmax./ T5:Ta=65°Cmax./ T4: Ta=80°Cmax. Plaque signalétique Aluminium / St. St rivets Type ISA - 316L St. St. Dimensions (Øxh) Ø 103mm, h=117mm Rod Ø 14mm 316L St. St. Connection M20x1,5 cable gland (cables Ø 5 à 9mm) Protection IP67– screwed cover Coating No - Raw Stainless steel finish Explosion proof "d"certified version Marking *** II 2G EExdIICT6 Certificate ATEX "d" Connection M20x1,5 cable gland "d" certified Protection IP67– screwed cover Coating No - Raw Stainless steel finish * The transmitter electronical unit must be choosen among the ATEX IS certified units (see next page) ** The ATEX marking complies with the 94/09/EC Directive and certify the transmitter, the reed switch line and the housing. *** The ATEX marking complies with the 94/09/EC Directive and certify the reed switch line and the housing