Brooks® QUANTIM® Low Flow Coriolis - Brooks Instrument - #16

Text version of the page

16 Data Sheet DS-CM-QmB-eng QmB Series IP40, IP65, IP65XP May, 2008 BROOKS LOCAL AND WORLDWIDE SUPPORT .. Brooks Instrument provides sales and service facilities around the world. .. Calibration facilities are available in local sales and service offices. Certified by our local Weights and Measures Authorities and traceable to the relevant international standards. START-UP SERVICE AND IN-SITU CALIBRATION .. Brooks Instrument can provide start-up service prior to operation when required, if necessary under in-situ conditions, and the results will be traceable to the relevant international quality standards. CUSTOMER SEMINARS AND TRAINING .. Brooks® can provide customer seminars and dedicated training to engineers, end users and maintenance persons. TECHNICAL ASSISTANCE: Americas 1-888-554-FLOW Europe +(31)-318-549-290 Within Netherlands 0318-549-290 Asia +011-81-3-5633-7100 Due to Brooks Instrument's commitment to continuous improvement of our products, all specifications are subject to change without notice. Model Code for QmB (continued) SEALS OPTION SENSOR VALVE STEM FITTING ORIFICE SEAL SELECTION A VITON VITON VITON STAINLESS STEEL NOTE: B BUNA BUNA BUNA STAINLESS STEEL Process C KALREZ KALREZ KALREZ STAINLESS STEEL connection E EPDM EPDM EPDM STAINLESS STEEL code 1A F NICKEL NICKEL VITON STAINLESS STEEL and 1Y G NICKEL NICKEL BUNA STAINLESS STEEL have no H NICKEL NICKEL KALREZ STAINLESS STEEL fitting J NICKEL NICKEL EPDM STAINLESS STEEL seals K NICKEL NICKEL NICKEL STAINLESS STEEL (CONTRLR) OPTION VALVE SEAT MATERIAL SELECTION 1 NONE (METER OR SENSOR) 7 MATERIAL 17-7PH STAINLESS STEEL (CONTROLLER) OPTION SPECIAL PROCESSING SELECTION A NONE B CERTIFIED MATERIAL 2.2 EN 10204 C CERTIFIED MATERIAL 3.1 EN 10204 D CLEANING FOR OXYGEN SERVICE E CLEAN FOR O2 + CERT MATERIAL 2.2EN10204 F CLEANING FOR O2 + CERT MATATERIAL 3.1EN10204 OPTION QUALITY CERTIFICATIONS SELECTION 1 NONE 2 CALIBRATION CERTIFICATION TRACEABLE TO NIST 3 CALIB. MEASUREMENT CAPABILITY CERT (NMI) 4 CERTIFICATE OF CONFORMANCE 5 CALIB. CERT TRACEABLE TO NIST + C OF C 6 CALIB. MEASUREMENT CAPABILITY CERT + C OF C OPTION INLINE FILTER SELECTION A NONE (METAL SEAL OR DOWNPORT) B INLINE FILTER CARTRIDGE FILTER, 10 MICRON B or F RECOMMENDED FOR QMBC2 C INLINE FILTER CARTRIDGE FILTER, 20 MICRON D INLINE FILTER CARTRIDGE FILTER, 30 MICRON E INLINE FILTER CARTRIDGE FILTER, 40 MICRON F INLINE FILTER CARTRIDGE FILTER, 1 MICRON B or F RECOMMENDED FOR QMBC2 OPTION OEM CODE SELECTION A BROOKS N NO LOGO