CORI-FILL technology
8Pages

{{requestButtons}}

Catalog excerpts

CORI-FILL technology - 1

CORI-FILL™ Coriolis Mass Flow Meter Based Compact Fluid Dosage Assembly

Open the catalog to page 1
CORI-FILL technology - 2

Introduction Bronkhorst® manufactures Coriolis Mass Flow ­ eters and M Controllers for gases and liquids. The CORI-FLOW ­ roduct range p offers true mass flow in a range from 20 g/h up to 600 kg/h. The compact mini CORI-FLOW Series are designed for ­ apacities from c 20 mg/h up to 300 kg/h. Both mini CORI-FLOW and CORI-FLOW instruments can be combined with an actuator: ­ • hut-off valve for short time batch sequences s (down to < 0.1 sec.) • roportional valve for accurately controlled longer duration p batch sequences • gear) pump for long time accurate controlled batch sequences ( without...

Open the catalog to page 2
CORI-FILL technology - 3

Local operation > Via E-8000 R/C-panel or BRIGHT R/C-module > Indication of: • measured value (direct or %) and setpoint • totalized flow (mass or volume) > Batch control > Alarm functions > Desired flow/batch to be set through: • Keyboard on operation module, • Analog 0...5(10) V / 0(4)...20 mA or • igital communication by RS232 or optional fieldbus D mini CORI-FLOWTM with integrated proportional valve assembly for continuous dosing or batching with purge functionality Reset counter Specifications Flow ranges 50 mg/h...600 kg/h FS, several models with different flow ranges Pressure range...

Open the catalog to page 3
CORI-FILL technology - 4

CORI-FILL™ Technology CORI-FILL with shut-off valves TM All CORI-FLOW instruments are capable of operating with both +24Vdc electric shut-off valves and pneumatic valves. Electric valves can be operated within a special power ­ aving mode to s reduce energy consumption and minimize temperature i ­ncrease thereby reducing the risk of fluid evaporation. TM 0 Counter value Density Temperature Setpoint Measure Controller output Typical response curve CORI-FILL technology includes an automatic overrun cor­ec­ion ­ r t on batch dosing. After just a few doses the ­ ccuracy will be a o ­ ptimized...

Open the catalog to page 4
CORI-FILL technology - 5

CORI-FILL with proportional valves and pumps TM All CORI-FLOW instruments are capable of operating with propor­ tional valves or (gear) pumps using the integrated PID-controller. ­ Thanks to CORI-FILL technology, all batch counters now have an e ­ xtra P-controller to make the valve close or make the pump stop smoothly as soon as the batch total is reached. TM Benefits • “First time right” batch (no overrun correction needed) • Suitable for longer dosing times (> approx. 3 seconds) • Also applicable for pump control Liquid dosing system consisting of a mini CORI-FLOW Mass Flow Meter, TM...

Open the catalog to page 5
CORI-FILL technology - 6

CORI-FILL™ Alternative to gravimetric method Existing applications using weighing scales (the gravimetric method) Improved dosing applications using Coriolis i ­ nstruments with CORI-FILL technology Traditionally, dosage of mass/volume is achieved by using a shut-off ­ valve with a weighing scale/balance. The weighing scale is located under a valve outlet nozzle and, after a zeroing procedure, the valve ­ will open. The weighing scale will send a signal to PLC or control unit ­ and when the batch has been reached the valve will lose. Eventually the weighing scale will move to another valve...

Open the catalog to page 6
CORI-FILL technology - 7

Examples M14 with integrated shut-off valve, dosing 5 gram into a cup with a flow speed of 30 kg/h water takes 0.6 seconds and giving ­ highly accurate and reproducable results. Testing of pumps or batching with pumps with pulsating flows is possible now thanks to CORI-FILLTM technology. The very fast and accurate batch counter will be able to ­integrate also very pulsating or fluctuating flows. This also can make weighing scales superfluous. When a piston pump pulsates with max. 2...3 pulses per second, the totalized flow can be ­integrated with approx. 1% accuracy. mini CORI-FLOW with...

Open the catalog to page 7
CORI-FILL technology - 8

Europe ~ Austria HL-Trading GmbH T 0662-439484 I www.hl-trading.at E sales@hl-trading.at I Belgium Gefran-Flowcor T 014-248181 I www.gefran.com/nl/benelux E info@gefran.be ► Czech Republic D-Ex Instruments T 05-41423211 I www.dex.cz E info@dex.cz SS Denmark Insatech A/S T 55372095 I www.insatech.com E mail@insatech.com +■ Finland YTM-Industrial Oy T +358 29 006 230 I www.ytm.fi E ytm.info@ytm.fi II France 0> Bronkhorst (France) S.A.S. T 01-34508700 I www.bronkhorst.fr E sales@bronkhorst.fr S Germany (north) Bronkhorst Deutschland Nord GmbH T 02307-925120 I www.bronkhorst-nord.de E...

Open the catalog to page 8

All Bronkhorst catalogs and technical brochures

  1. LOW-ΔP-FLOW

    8 Pages

  2. METAL SEALED

    6 Pages

  3. IQ+FLOW

    6 Pages

  4. MASS-VIEW

    8 Pages

  5. EX-FLOW

    4 Pages

  6. BRIGHT

    4 Pages

  7. FLOW-SMS

    6 Pages

  8. E-8000

    8 Pages

  9. EL-FLOW Base

    4 Pages

  10. IN-FLOW

    8 Pages

  11. MAG-VIEW

    3 Pages

  12. MANI-FLOW

    1 Pages

  13. FLOW-ADJUST

    2 Pages

Archived catalogs

  1. SONIC-VIEW

    2 Pages