Differential-Hall-Effect based Sensors - Braun Industrie-Elektronik - #1

Text version of the page

Differential-Hall-Effect based Sensors • Speed range covering: from close to zero up to 12,000 pulses / sec. (response time max. 40 microseconds) • Clearance to the rotating part up to 4 mm (depending on the profile size) • Temperature range –40 °C … +125 °C (–40 … +255 °F) • Differential principle hinders the influence of external magnetic fields and of machine vibration • Sealed stainless steel enclosure (1.4305) with protection grade IP67 and allowing > 200 bar pressure to sensor tip. Available for connection via tight plug, or with firmly attached cable (standard or Teflon insulated) • Powerful square wave output signal equally high over the entire speed range. Level approximately that of the supply voltage. Adequate for signal transmission over more than 500 m. • Accepting fine and coarse profiles, as gear wheels, slots, cams, holes in any ferrous material, or rotating magnets. Outstanding Characteristics: A5S