| Material # Material | Colour | Temp. Range | Technology | Properties & Applications |
| B-487 | Polyimide | White | -70°C to 350°C 80 seconds at 350°C | Thermal Transfer | Polyimide film with a permanent acrylic adhesive, designed to withstand the various processes, fluxes and cleaning solvents encountered in the manufacture of printed circuit boards. Matt topcoat provides excellent resistance to solder ^ balling. Can be used for top- or bottom-side component or board identification. |
| B-488 | Polyester | White | -40°C to 160°C | Thermal Transfer | Electronic PCB and component; bar code label and rating plates. (K) (SfUffiS High performance matt white. |
| B-489 | Polyester | White | -40°C to 120°C | Thermal Transfer | Matt polyester with ultra agressive, permanent adhesive. Designed for high adhesion to textured metals, low surface energy plastics, or powder ® ©" coated surfaces. |
| B-490 | Polyester | White | -136°C to 130°C | Thermal Transfer | This material offers the unique ability to apply identification to a frost |
| | | | | | covered/cryogenically frozen surface. |
| B-497 | Polyimide | White | -70°C to 350°C 80 seconds at 350°C | Thermal Transfer | 1-mil low profile polyimide film with a permanent acrylic adhesive, designed to withstand the various processes, fluxes and cleaning solvents encountered in the .5-. manufacture of printed circuit boards. Matt topcoat provides excellent resistance to solder balling. Can be used for top- or bottom-side component or board identification. |
| B-498 | Vinyl Cloth | White | -40°C to 80°C | Thermal Transfer | Wire, cable and component marking. Repositionable, removes cleanly. .j. |
| | | | | TLS2200® | Suitable for general identification. |
| B-499 | Nylon Cloth | White | -70°C to 90°C | Thermal Transfer Dot Matrix ID PRO Plus LS2000,TLS2200 | Wire and electronic component marking. Permanent adhesive. High adhesion makes all purpose wire marking ideal for environments IT ® O where heat, cold, oil and dirt are present. Also ideal for laboratory ' vial identification. |
| B-500 | Vinyl Cloth | White and | -40°C to 80°C | Pre-Printed | Moderately resistant to heat, oil and dirt. Environments containing heat, oil |
| | | Colours | | | or dirt. Wire and cable marker. Repositionable. |
| B-502 | Vinyl Cloth | White | -40°C to 80°C | Dot Matrix ID PRO Plus LS2000 | Resistant to oil, water, humidity. Excellent printability; ink-receptive coating. Applications requiring general-purpose permanent or temporary labelling or marking with printable or write-on properties. Leaves no adhesive residue when removed - good EPROM label. Cable and wire markers. Repositionable. |
| B-503 | Cloth | White | -40°C to 90°C | Dot Matrix | Highly conformable. Self-extinguishing, printable tag. Designed for wire and cable identification. Meets UL94VTM-0 for flame retardancy. |
| B-508 | Nomex® Tag | White or Yellow | -70°C to 130°C | Dot Matrix | Computer-printable Nomex® tag stock. Designed as a high-performance wire bundle and cable identification tag for use in harsh environments. |
| B-520 | Glass Cloth | White | -65°C to 500°C | Thermal Transfer Custom No Stock Parts | Woven glass cloth. Adheres strongly to glass and a variety of metal surfaces. Designed to withstand harsh temperatures, acidic and alkaline environments. Label is pressure sensitive at room temperature and becomes permanently affixed at temperatures above 400°C. |
| | | | |
| B-540 | Saturated Crepe | Beige | -40°C to 50°C | N.A. | Good conformability; resistant to heat and moisture. Strips cleanly when removed. |
| | Paper | | 2 hours at 145°C | | Temporary protective covers such as paint masking. Good for small sized masks. |
| B-607 | Vinyl | White | -40°C to 70°C | Dot Matrix ID PRO®Plus LS2000 | Tamper-evident film with a permanent acrylic adhesive. Designed to fracture easily to prevent removal in one piece. ® @- |
| B-609 | Paper | White | -40°C to 70°C | Dot Matrix | Permanent adhesive; smudge resistant; write-on coating; low internal strength. Applications requiring economical, general-purpose label. |
| | | | | Dot Matrix ID PRO Plus LS2000 | Resistant to solvents; smudge-resistant. High resolution; high-temperature performance. Applications requiring bar code printing, electronic component, ® @. solvent or high temperature resistance and circuit board ID. |
| B-619 | Polyester | White | -70°C to 145°C |
| B-621 | Polyester | Clear | -70°C to 120°C | Dot Matrix | Excellent write-on coating. Computer-printable overlaminate. Translucent. |
| | | | | ID PRO Plus LS2000 | |
| B-624 | Polyester | White | -40°C to 120°C | Dot Matrix ID PRO Plus LS2000 | Excellent write-on and computer-printability. Applications requiring durable write-on bar code printable or computer-printable labels. Suitable for indoors or outdoors. Adheres well to rough surfaces. |
| B-632 | Tedlar® | White | -70°C to 130°C | Dot Matrix ID PRO Plus | Smear-resistant; computer-printable. Good flexibility. Applications requiring write-on and self-extinguishing properties. Excellent computer-printable wire marker material. |