Catalog excerpts
FAMILY - E FIXED AND INDEXED CRANK HANDLES update 2014
Open the catalog to page 1cRANK HANDLE WITH THREADED INSERT AND REVOLVING HANDLE Material: Reinforced polyamide. Oils and greases resistant. Surface: Satin. Colour: Alternative Cap Colour: Orange Red Blue Green Yellow Black Main Insert: Brass blind threaded bush. (*) Zinc plated steel blind threaded bush. Side Insert: Brass right through threaded bush. Side Handle: E215: Revolving handle Art. M144 E219: Revolving handle Art. M129 E220: Revolving handle Art. M145 special requests: Art. E219 • It is possible to supply the inserts in different materials, on request and for quantities. • It is possible to supply arm and...
Open the catalog to page 2cRANK HANDLE WITH THREADED INSERT AND REVOLVING HANDLE cRANK HANDLE WITH THREADED INSERT AND REVOLVING HANDLE m129 F E - FIXED AND INDEXED CRANK HANDLES ( F ) 90%( J ) 40%( K ) 5%( L ) BOTECO ® - © All right reserved - www.boteco.it Any unathorized reproduction is strictly forbidden Presumable presence in the stock in % cRANK HANDLE WITH THREADED INSERT AND REVOLVING HANDLE m145
Open the catalog to page 3cRANK HANDLE WITH THREADED INSERT AND REVOLVING and folding HANDLE Material: Reinforced polyamide. Oils and greases resistant. Surface: Satin. Colour: Alternative Cap Colour: Orange Red Blue Green Yellow Black Main Insert: Brass blind threaded bush. (*) Zinc plated steel blind threaded bush. Side Insert: Brass right through threaded bush. Side Handle: Revolving handle Art. M136. special requests: • It is possible to supply the inserts in different materials, on request and for quantities. • It is possible to supply arm and handle with colours as shown in the table at pag. 19, on request and...
Open the catalog to page 4CRANK HANDLE WITH SMOOTH FOLDING HANDLE Material: Reinforced polyamide. Oils and greases resistant. Surface: Satin. Central Cap: Grey polyamide RAL 7035 (cod. 13). Main Insert: Zinc plated steel insert with smooth through-hole (H11 tolerance). Side Insert: Brass right through threaded bush. Side Handle: Revolving handle and folding Art. M136. SPECIAL REQUESTS: • It is possible to supply the inserts with d1 diameter by customer design, on request and for quantities. • It is possible to supply the inserts in different materials, on • It is possible to supply the inserts in different...
Open the catalog to page 5cRANK HANDLE WITH smooth INSERT AND REVOLVING HANDLE Material: Reinforced polyamide. Oils and greases resistant. Surface: Satin. Colour: Alternative Cap Colour: Orange Red Blue Green Yellow Black Main Insert: Zinc plated steel insert with smooth through-hole (H11 tolerance). Side Insert: Brass right through threaded bush. Side Handle: E216: Revolving handle Art. M144 E221: Revolving handle Art. M145 E222: Revolving handle Art. M129. special requests: • It is possible to supply the inserts with d1 diameter by customer design, on request and for quantities. • It is possible to supply the...
Open the catalog to page 6CRANK HANDLE WITH SMOOTH INSERT AND REVOLVING HANDLE dm = It's possible to Increase the hole, by boring, until Dm (enlarge). CRANK HANDLE WITH SMOOTH dm = It's possible to Increase the hole, by boring, until Dm (enlarge). CRANK HANDLE WITH SMOOTH dm = It's possible to Increase the hole, by boring, until Dm (enlarge). Presumable presence in the stock in % ~\ ✓ _ »ui» iiinEvrn (S) 90%(©) 40%(©) 5%(©)lllllllllllllll (^T) EldT^tLa MINIM AM^llAMniK BOTECO® - © All right reserved - www.boteco.it CRANK HANDLES Any unathorized reproduction is strictly forbidden E - 7 ver. EUK.12-0314
Open the catalog to page 7CRANK HANDLE WITH HEXAGONAL STUD AND REVOLVING HANDLE Material: Reinforced polyamide. Oils and greases resistant. Surface: Satin. Main Insert: Zinc plated steel hexagonal stud. Side Laterale: Brass right through threaded bush. Side Handle: SPECIAL REQUESTS: • It is possible to supply inserts in different lenghts or by special design, on request and for quantities. • It is possible to supply the inserts in different treatment-finishes, • It is possible to supply arm and handle with colours as shown in the table at pag. 19, on request and for quantities. IMRCVCriV /^^\ Presumable presence in...
Open the catalog to page 8CRANK HANDLE WITH HEXAGONAL STUD AND REVOLVING HANDLE LM = Maximum mouldable lenght CRANK HANDLE WITH HEXAGONAL STUD AND REVOLVING HANDLE M145 LM = Maximum mouldable lenght CRANK HANDLE WITH HEXAGONAL STUD AND REVOLVING HANDLE M129 LM = Maximum mouldable lenght Presumable presence in the stock in % BOTECO ® - © All right reserved - www.boteco.it Any unathorized reproduction is strictly forbidden CRANK HANDLES
Open the catalog to page 9crank handle with hexagonal hole and revolving handle Material: Reinforced polyamide. Oils and greases resistant. Surface: Satin. Colour: Alternative Cap Colour: Orange Red Blue Green Yellow Black Main Insert: Black-oxide treated insert, with hexagonal through-hole (H11 tolerance). Side Laterale: Brass right through threaded bush. Side Handle: E230: Revolving handle Art. M144 E231: Revolving handle Art. M145 E232: Revolving handle Art. M129. special requests: Art. E231 • It is possible to supply the inserts in different treatment-finishes, on request and for quantities. • It is possible to...
Open the catalog to page 10crank handle with hexagonal hole and revolving handle crank handle with hexagonal hole - revolving handle M145 - E - FIXED AND INDEXED CRANK HANDLES ( F ) 90%( J ) 40%( K ) 5%( L ) BOTECO ® - © All right reserved - www.boteco.it Any unathorized reproduction is strictly forbidden Presumable presence in the stock in % crank handle with hexagonal hole - revolving handle M129 F
Open the catalog to page 11crank handle with square hole and revolving handle Material: Reinforced polyamide. Oils and greases resistant. Surface: Satin. Colour: Alternative Cap Colour: Orange Red Blue Green Yellow Black Main Insert: Black-oxide treated insert, with square through-hole, H11 tolerance. Side Insert: Brass right through threaded bush. Side Handle: E330: Revolving handle Art. M144 E331: Revolving handle Art. M145 E332: Revolving handle Art. M129. special requests: • It is possible to supply the inserts in different treatment-finishes, on request and for quantities. • It is possible to supply arm and...
Open the catalog to page 12All Boteco catalogs and technical brochures
-
L274HIN
1 Pages
-
Family E
24 Pages
-
Family C
12 Pages
-
Family D
20 Pages
-
Family B
38 Pages
-
Family A
34 Pages
-
T558
1 Pages
-
T559
2 Pages
-
T710
1 Pages
-
T200
1 Pages
-
B230
1 Pages
-
A593CIN
1 Pages
-
A593
1 Pages
-
A592CIN
1 Pages
-
A592
1 Pages
-
A583CIN
1 Pages
-
A583
1 Pages
-
A582CIN
1 Pages
-
A582
1 Pages
-
A581
1 Pages
-
A580
1 Pages
-
A573
1 Pages
-
A572
1 Pages
-
A563CIN
1 Pages
-
A563
1 Pages
-
A562CIN
1 Pages
-
A562
1 Pages
-
A530
1 Pages
-
A529
1 Pages
-
A528
1 Pages
-
A525
1 Pages
-
A524
1 Pages
-
A523
1 Pages
-
A522
1 Pages
-
A151
1 Pages
-
A150
1 Pages
-
B221
1 Pages
-
A149
1 Pages
-
A148
1 Pages
-
W860 -W860CIN
1 Pages
-
METAL AND PLASTIC BRIDGE HANDLES
32 Pages
-
SOLID CONTROL HANDWHEELS
12 Pages
-
CONTROL HANDWHEELS
20 Pages
-
LOCKING KNOBS AND HANDWHEELS
24 Pages
-
KNURLED KNOBS
20 Pages
-
BALL KNOBS AND MUSHROOMS KNOBS
24 Pages
-
T HANDLES AND WINGNUTS
28 Pages
-
TAPERED AND REVOLVING HANDLES
28 Pages
-
CONTROL KNOBS
20 Pages
-
PLASTIC AND METAL HINGES
20 Pages
-
MOUNTING FEET
32 Pages
-
PLASTIC WASHERS
8 Pages
-
MACHINE TOOLS ACCESSORIES
36 Pages
-
WELDING ACCESSORIES
24 Pages
-
LATCHING SYSYEMS
12 Pages
-
METAL LINE
20 Pages
-
BALL PLUNGERS
24 Pages
-
PLUNGERS
20 Pages