Catalog excerpts
FAMILY - K CONTROL HANDWHEELS WITH INDICATOR UPDATE 2013
Open the catalog to page 1KNURLED KNOB WITH INDICATOR Reinforced polyamide. Oils and greases resistant. Handwheel Colour: Black (RAL 9011). Mountable Indicator: Gravity indicator type “K650”. Standard dirt-tight version. Two indicators. Black graduated scale proportioned to the drive ratio. Standard transparent cover. Clockwise and counter clockwise rotation. Non removable indicator. ATTENTION: In your order specify the following information and select the corresponding letter to be inserted in the code: Rotation direction O= increase of values with clockwise rotation. A= increase of values with counter clockwise...
Open the catalog to page 2CONTROL KNOB PREPARED Reinforced polyamide. Oils and greases resistant. Surface: Satin. Handwheel Colour: Black (RAL 9011). Mountable Indicator: Gravity indicator type "K650050". The indicator can be only used in a vertical position (machine axis horizon- tal). The indicator must be purchased separately. For more information on K650 see on page K-24. Main Insert: Zinc plated steel right through bored bush with H11 The knob is fixed to the shaft by means of the threa- ded (d4) radial bore. (grub screw not supplied ). Indicator Fastening: Fix the indicator with a threaded grub screw M4. ( Not...
Open the catalog to page 3POSITION INDICATOR ADAPTER Reinforced polyamide. Oils and greases resistant. Handwheel Colour: Fastening Holes: The same adapter can be used with several spoke handwheels. To fix the adapter firstly select the pair of holes suitable for the diameter of the handwheel in use (the diameters are engraved next to one of the two holes to facilitate selection); drill through with a normal 4.5 mm drill bit, then countersunk the hole to accept the countersunk screw. The two self-tapping screws (TPS 4X16) are provided with the adapter. As an exemple the drawing on the right shows the countersunk...
Open the catalog to page 4two spoke handwheel with indicator seat Reinforced polyamide. Oils and greases resistant. Zinc plated steel right through bored bush with H7 tolerance. Indicator Fastening: Fix the position indicator with an M4 grub screw insered in the d4 hole. (Grub screw supplied with the adapter) Handwheel Fastening: Fix the handwheel to the shaft with thrust grub screw (not supplied) insered in the d2 threaded hole ( M05). special requests: • It is possible to supply the inserts with d1 diameter by custo- mers design, on request and for quantities. • It is possible to supply the inserts in different...
Open the catalog to page 5two spoke handwheel with revolving handle and indicator seat Reinforced polyamide. Oils and greases resistant. Surface: Satin. Colour: Main Insert: Zinc plated steel right through bored bush with H7 tolerance. Side Insert: Brass right through threaded bush. (+) Black-oxide threated steel insert with hexagonal threaded through hole. Fixed with black-oxide threated hexagon socket button head screw ISO 7838. Side handle: Indicator Fastening: Fix the indicator with a threaded grub screw M4 insered in the bore d4. (grub screw supplied) Handwheel Fastening: The handwheel is fixed to the shaft by...
Open the catalog to page 6SOLID CONTROL HANDWHEEL WITH INDICATOR SEAT Reinforced polyamide. Oils and greases resistant. Main Insert: Zinc plated steel right through bored bush with Indicator mountable: Use gravitational indicators K650 or K660 series. The indicator can be used in a vertical position (horizontal axis machine). The indicator and the grub screw (d7) must be purchased separately. For further information on the indicators refer to page For fixing system, or execution of keyway or square holes, please refer to the technical notes attached SPECIAL REQUESTS: • It is possible to supply the inserts with d1...
Open the catalog to page 7SOLID CONTROL HANDWHEEL WITH INDICATOR SEAT AND WITH LOCKIN KNOB Reinforced polyamide. Oils and greases resistant. Surface: Satin. Main Insert: Zinc plated steel right through bored bush with Indicator mountable: Use gravitational indicators K650 or K660 series. The indicator can be used in a vertical position (horizontal axis machine). The indicator and the grub screw (d7) must be purchased separately. For further information on the indicators refer to page K-24/25. (*) With the adapter KS08050.T01 you can mount the Locking knob: Cylindrical knob black (Ral 9011) art. G793-36 with threaded...
Open the catalog to page 8SOLID CONTROL HANDWHEEL WITH INDICATOR SEAT AND REVOLVING HANDLE • WITH LOCKING KNOB Reinforced polyamide. Oils and greases resistant. Surface: Satin. Main Insert: Zinc plated steel right through bored bush with H11 Indicator mountable: Use gravitational indicators K650 or K660 series. The indicator can be used in a vertical position (horizontal axis machine). The indicator and the grub screw (d7) must be purchased separately. For further information on the indicators refer to page. K-24/25. (*) With the adapter KS08050.T01 you can mount the Side Insert: Brass right through threaded bush....
Open the catalog to page 9solid control handwheel with indicator seat and revolving handle Reinforced polyamide. Oils and greases resistant. d6 Side Insert: Zinc plated steel right through bored bush with H11 tolerance. Main Insert: Brass right through threaded bush. Side handle: Grub screw position Use gravitational indicators K650 or K660 series. The indicator can be used in a vertical position (horizontal axis machine). The indicator and the grub screw (d7) must be purchased separately. For further information on the indicators refer to page. K-24/25. (*) With the adapter KS08050.T01 you can mount the indicator...
Open the catalog to page 10SOLID CONTROL HANDWHEEL WITH INDICATOR SEAT Side handle: Revolving handle type M145 (page M-08). SOLID CONTROL HANDWHEEL WITH INDICATOR SEAT Side handle: Revolving handle type M129 (page M-10). SOLID CONTROL HANDWHEEL WITH INDICATOR SEAT Side handle: Revolving handle type M202 (page M-18). For further details see art. K902 @iuROMCM HANDWHEEL WITH INDICATOR SEAT AND SIDE HANDLE THREAD PROVISION Presumable presence in the stock in % BOTECO ® - © All right reserved - www.boteco.it Any unathorized reproduction is strictly forbidden K - 11
Open the catalog to page 11All Boteco catalogs and technical brochures
-
L274HIN
1 Pages
-
Family E
24 Pages
-
Family C
12 Pages
-
Family D
20 Pages
-
Family B
38 Pages
-
Family A
34 Pages
-
T558
1 Pages
-
T559
2 Pages
-
T710
1 Pages
-
T200
1 Pages
-
B230
1 Pages
-
A593CIN
1 Pages
-
A593
1 Pages
-
A592CIN
1 Pages
-
A592
1 Pages
-
A583CIN
1 Pages
-
A583
1 Pages
-
A582CIN
1 Pages
-
A582
1 Pages
-
A581
1 Pages
-
A580
1 Pages
-
A573
1 Pages
-
A572
1 Pages
-
A563CIN
1 Pages
-
A563
1 Pages
-
A562CIN
1 Pages
-
A562
1 Pages
-
A530
1 Pages
-
A529
1 Pages
-
A528
1 Pages
-
A525
1 Pages
-
A524
1 Pages
-
A523
1 Pages
-
A522
1 Pages
-
A151
1 Pages
-
A150
1 Pages
-
B221
1 Pages
-
A149
1 Pages
-
A148
1 Pages
-
W860 -W860CIN
1 Pages
-
METAL AND PLASTIC BRIDGE HANDLES
32 Pages
-
SOLID CONTROL HANDWHEELS
12 Pages
-
CONTROL HANDWHEELS
20 Pages
-
PLASTIC CRANKS
24 Pages
-
LOCKING KNOBS AND HANDWHEELS
24 Pages
-
KNURLED KNOBS
20 Pages
-
BALL KNOBS AND MUSHROOMS KNOBS
24 Pages
-
T HANDLES AND WINGNUTS
28 Pages
-
TAPERED AND REVOLVING HANDLES
28 Pages
-
CONTROL KNOBS
20 Pages
-
PLASTIC AND METAL HINGES
20 Pages
-
MOUNTING FEET
32 Pages
-
PLASTIC WASHERS
8 Pages
-
MACHINE TOOLS ACCESSORIES
36 Pages
-
WELDING ACCESSORIES
24 Pages
-
LATCHING SYSYEMS
12 Pages
-
METAL LINE
20 Pages
-
BALL PLUNGERS
24 Pages
-
PLUNGERS
20 Pages