Structure and design
The product designation “U-MB”
stands for “UNIVERSAL Modular
Boiler”. As you can already gather from
the name, the
boiler consists of several
modules, the heat generator part in
three-pass design, the steam chamber
located above it and an integrated
economiser. Each module can be
selected independent from the others in
a customer-specific way according to the
customer's requirements. Energy
efficiency, steam quality and emissions
can be optimised that way.
As a genuine three-pass
boiler it can
reach a very high efficiency. Built-in flow
control devices in the flame tubes are not
necessary.
Customised modular
boiler technology
Steam
boiler LOOS UNIVERSAL U-MB
modular
boiler
Dipl. Wirtschaftsing. (FH), Dipl. Informationswirt (FH) Markus Tuffner, LOOS INTERNATIONAL
Shell
boilers, also called flame tube
boilers, are exclusively three-pass flame-tube
boilers. However, for
considered easy to operate and maintain, resistant, rough smaller steam quantities of up to approx. 2,000 kg/h, a
and long-lasting. Even with changing loads they provide multitude of
steam boiler designs are competing on the
a high-pressure stability and good steam quality. In the market. This is mainly due to the demanding production
long history of
steam boiler technology this design type, processes for three-pass shell
boilers compared to less
particularly the three-pass f lame-tube
boiler, was able to complex designs. The LOOS U-MB three-pass shell
assert itself due to the high energy utilisation and low
steam boiler is a revolution in the market for steam
emission rates. Thus, the
boilers used for medium to generators in this performance range.
high steam capacities of up to 55,000 kg/h are almost
1.
Three-pass shell
boiler LOOS UNIVERSAL Modular Boiler U-MB (
boiler in modular design)
Expert Report
The Boiler Company
