| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | | Welcome to BOPLACity! | | |
| | | |
| | | Enclosure material: EG... type: impact-resistant polystyrene; EG-AL 12... type: Al Mg Si 0.5; for technical data, see "the red book" main catalogue, pages 646-655. | | Accessories (additional charge): | | |
| | | Note: For information on additional Elegant types and accessories, please see "the red book" main catalogue, page 124. | | |
| | | |
| | | Wall brackets (1 set = 4 pieces) Screw cover (1 set = 4 pieces) Cover for keyhole suspension (1 set = 4 pieces) Rubber feet (1 set = 4 pieces) Mounting plate For standard membrane keypads for EG 12..F see "the red book" main catalogue, pages 596-597. | | |
| | | EG-WL: EG-SA: EG-AK: EG-GF: EG-M | | |
| | | |
| | | |
| | | Colour: | | Lid light grey,
| | |
| | | |
| | | |
| | | similar to RAL 7035, base, covers and front panels agate grey, similar to RAL 7038; special colours on request. Ingress protection: IP 40/DIN EN 60529, higher protection on request. Scope of delivery: Lid, base, screws and cover or front panel depending on model. | | |
| | | |
| | | Order designation | | External dimensions | | |
| | | |
| | | | | | | | | | | | | | | Model | Order no. | L | W | H | | | | | EG-AL 1230 | 32123090 | 128.8 | 70.8 | 30 | | | | Without integrated - | EG-AL 1240 | 32124090 | 128.8 | 70.8 | 40 | | | | ventilation | EG-AL1250 | 32125090 | 128.8 | 70.8 | 50 | | | | | | | | | | | | | |
| | | | | | | | | | | | Enclosure | Dimensions | | | | Model | L | W | H | | | | EG 1030 | 100 | 54 | 30 | | | | EG 1040 | 100 | 54 | 40 | | | | EG 1230 | 125 | 67 | 30 | | | | EG 1240 | 125 | 67 | 40 | | | | EG 1250 | 125 | 67 | 50 | | | | EG 1530 | 150 | 82 | 30 | | | | EG 1545 | 150 | 82 | 45 | | | | EG 1560 | 150 | 82 | 60 | | | | EG 2030 | 200 | 112 | 30 | | | | EG 2050 | 200 | 112 | 50 | | | | EG 2070 | 200 | 112 | 70 | | | | | | | | | | | |
| | | With integrated ventilation (L) | | |
| | | |
| | | Cover panel with ventilation (BL) | | |
| | | |
| | | - Wall mounting (break-out) | | |
| | | |
| | | NEW 3 aluminium designs EG-AL 12... | | |
| | | |
| | | Mounting bosses for PCBs in lid and base | | |
| | | |
| | | Membrane keypad area (F) | | |
| | | |
| | | available. retains its attractive design look. In addition, the elegant visual aspects and the appealing colour combinations highlight the value of the electronic components inside the enclosure. In particular when used as a wall enclosure, screw fitting from the lid can be achieved by means of special processing and a set of screws available as an accessory. Wall mounting can be carried out using integrated break-out keyhole suspension, or alternatively with mounted wall brackets. | | |
| | | |
| | | Air vents in type L | | |
| | | This small enclosure series with its many different variations provides optimal protection for your electronic products. With or without ventilation,! design covers, front panels made of aluminium or plastic and the optional design with a recessed lid for the flush fitting of membrane keypads make this enclosure ideal for many different uses. These range from desktop, hand-held or wall enclosures to inclined models (see "the red book" main catalogue, pages 124-131). The enclosure half shells are screwed together from the base, which ensures that the lid | | |
| | | |
| | | Plastic front panel (FK) | | |
| | | |
| | | Plastic front panel with integrated ventilation (FKL) on request | | |
| | | |
| | | |
| | | |
| | | All dimensions in mm. | | |
| | | 36 | | | 37 | | |
| | | | |
| | | |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |