Text version of the page 
Accessories for BOS-Streamline 600
BS 600 DI-D BS 600 ... max. PCB dimensions
Order designation ModelOrder no.LWHDesign BS 600 DI-D-100382861003 161.782.129.6Signal yellow, sim. to RAL 1003 BS 600 DI-D-300182863001 161.782.129.6Signal red, sim. to RAL 3001
BaseBase
Base
Lid
With the DIS type,the PCB can be manufacturedas short as required.
BS 600 / 602(parallel)-lid F/DIS-baseBS 600 / 602(inclined)-lid F/DIS-baseBS 601 / 603 / 604(parallel)-lid F/DIS-base-BE-3MGBS 601 / 603 / 604(inclined)-lid F/DIS-base-BE-3MG BS 600 DI-D-500582865005 161.782.129.6Signal blue, sim. to RAL 5005 BS 600 DI-D-603282866032 161.782.129.6Signal green, sim. to RAL 6032
142
3
BS 600 DI-D-702482867024 161.782.129.6Graphite grey, sim. to RAL 7024
4249.5
Ø3.2Ø3.2
4252.5 Scope of delivery:
R5,5 Decor seal, 4 screws
15.4
19.5 142 BS 600 with DI-Dassembled parallel
BS 600 with DI-Dassembled inclined
BS 600 DI-D
Depending on the torque,the dimensions are reduced by up to 0.5 mm. Decor seal to achieve ingress protec-tion IP 65 coupled with anti-knockfunction. The decor seal has a hardness level of 40 Shore and can easily be pulled
from the rear over the base. Depending on tightening torque, thedecor seal increases the height of the
enclosure by approx. 5.5 mm and the
internal height of the enclosure by
approx. 2.5 mm. Even when the decorseal is used, the lids can still be fittedin parallel or in inclined form. The
enclosure screws are covered by the
decor seal.
Screw covers are available in the following colours: graphite grey (similar to RAL 7024), light grey (similar to RAL 7035).
Ø3.2
49.542 t=1.6t=1.6
t=1.6
t=1.6 5682.1
1335.238.239.5 44.538.8
38.842.8 146.5
15.3108.2130.8 147.5
15.4109.3130.9 Ø3.2
49.542 161.7
161.7 2.825.9
42.5 12134222
43
10 26.3
1352.8 BS SA-...
Order designation ModelOrder no.ØHDesign BS SA-7024 82800011 7.42.8Screw covers, graphite grey, sim. to RAL 7024 BS SA-7035 82800010 7.42.8Screw covers, light grey, similar to RAL 7035 Scope of delivery : 20 screw covers for enclosure screwing. Note: The screw covers are not required if decor seal DI-D is used.
Z-2802701
Z-2802692 18 All dimensions in mm. 19