BOCARD BCD 310

Clear lid, hinged

Order designation ModelOrder no.HWDDesignationBCD 310 OT-G-703520311035 28932437.2Clear lid, hinged withsnap lock, light grey, sim. to RAL 7035 Scope of delivery: BCD 310 OT-G-702420311024 28932437.2Clear lid, hinged withsnap lock, graphite grey, sim. to RAL 7024 1 lid, hinged1 catch1 blind plug The BCD 310 OT-G-... consists of aclear lid with a frame in light grey or graphite grey which contains the hinge and the snap-lock mechanism.The BCD 310 OT-G-… can be openedto more than 180° and is protected against being dropped accidentally. Assembly note: The OT-G hinge is latched onto the base.To open: The catch is not necessary for manual opening. The blind plug can beinserted to improve the appearance. (catch and blind plug are included in the scopeof delivery). If the catch is used, after closing the enclosure can only be opened with a tool(slotted-head screwdriver). A cylinder lock (optional) can also be fitted to preventunauthorised opening of the enclosure. For lock SHLO 402, see Accessories on page 319 of the “the red book“ general catalogue.

Membrane lid, hinged

Order designation ModelOrder no.HWDDesignationBCD 310 OT-FSC-703520311535 28932437.2Membrane lid, hinged withsnap lock, light grey sim. to RAL 7035 BCD 310 OT-FSC-702420311524 28932437.2Membrane lid, hinged withsnap lock, graphite greysim. to RAL 7024 The BCD 310 OT-FSC-... consists of amembrane lid to hold front membra- nes of membrane keypads and which contains the hinge and the snap-lock mechanism. The BCD 310 OT-FSC-… can be opened to more than 180° and is protected against being droppedaccidentally. Scope of delivery: 1 membrane lid 1 catch, 1 blind plug Assembly note: The OT-FSC-… latches onto the base. For additional information on mounting, see BCD 310 OT-G-...

Terminal compartment lid

Order designation ModelOrder no.HWDDesignation BCD 310 KRD-703520312035 7231120Terminal compartment lid, light grey, sim. to RAL 7035 BCD 310 KRD-702420312024 Scope of delivery: 7231120Terminal compartment lid, The terminal compartment lid isavailable in light grey or graphitegrey and has an area recessed by 1.5 mm to hold front membranes or membrane keypads. The ingress protection of the enclosu-re is not affected by the terminalcompartment lid, which is inside the seal section (integrated). 1 terminal compartment lid,2 screws graphite grey, sim. to RAL 7024 Note: The terminal compartment lid closes the terminal compartment after the base has been divided by means of industrial partitions and front panels. Assembly is by means of hooking in and screwing (screws are included in the scope of delivery). The terminal compartment can be arranged on the hinged side or the locking side,as required. It is also possible to set up 2 terminal compartments. 8 All dimensions in mm. Accessories which permit interesting applications for BOCARD can be found on theinternet at www.bopla.de or in the “the red book“ general catalogue starting on page 312. By using the BOCARD handle element, BOCARD can be used as a mobilecontrol unit. The article is designed for use with BOCARD sizes 160, 200 and 250.