Alu-Topline
Profiles
Order designation ModelOrder no.Profile lengthIP category ATPH 1865-0150 92865150 150IP 40 ATPH 1865-0200 92865200 200IP 40 ATPH 1865-0250 92865250 250IP 40 ATPH 1865-0300 92865300 300IP 40 Scope of delivery: Enclosure profile, split horizontally The robust
aluminium profiles havethe following lengths: 150, 200, 250and 300 mm. Special lengths areavailable on request. The split profile
guarantees easy assembly of the elec-
tronics. The profiles have a range of
PCB slots and screw channels so thatPCBs can be fitted in various positions.ABS plastic lids – in graphite grey orquartz grey – function as profile ends.The enclosure system has ingress pro-tection IP 40 as standard. By using sealAT 1865 DI, this can be increased tomax. IP 54. For this purpose, in
addition to the sponge cords, seals
must be factory-fitted in the enclosureprofile. Please ask us for an individualoffer. >
Lid
Order designation ModelOrder no.Design ATD 1865-7024 92065024 Graphite grey, sim. to RAL 7024 ATD 1865-7039 92065039 Quartz grey, sim. to RAL 7039 Scope of delivery: 2 lids (r. / l.)
8 screws8 screw covers >
Seal for ingress protection IP 54
Order designation ModelOrder no.AT 1865 DI 92065000Scope of delivery: 5 sets of sponge rubber seals (r. / l.) Important: To attain IP 54, in addition to seal AT 1865 DI, a sponge cord must be factory-fittedin the enclosure profile. >
Additional BOPLA desktop enclosure: Bopult
The elegant, ergonomic design is what distinguishes the two ABS desktop enclo-sures in this enclosure series. For both types, the generously-sized keypad areas
allow fitting of a
membrane keypad or a front membrane. In addition to desktopuse, the 900-F model is ideal for wall fitting. Because of the high level of IPprotection, this model is particularly suitable for use under extreme environmental
conditions. Further information is available on the internet at www.bopla.de orin the “the red book” general catalogue starting on page 168. 6 All dimensions in mm. >