Simplex filters Type 1.12.2 - BOLL & KIRCH Filterbau - #1

Text version of the page

Untitled table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:4.00pt "Arial", sans-serif; } .font1 { font:6.00pt "Arial", sans-serif; } .font2 { font:8.00pt "Arial", sans-serif; } .font3 { font:9.00pt "Arial", sans-serif; } .font4 { font:10.00pt "Arial", sans-serif; } .font5 { font:11.00pt "Arial", sans-serif; } .font6 { font:13.60pt "Arial", sans-serif; } .font7 { font:23.00pt "Arial", sans-serif; } .font8 { font:9.00pt "Palatino Linotype", serif; } B BOLLFILTER Protection Systems APPLICATION Filtration of all liquids. For installation into suction or pressure pipework to protect downstream equipment (pumps, bearings, heat exchangers, valves, pipework etc.) against con­tamination or accumulation of mud. OPERATION The filter is completely maintenance-free except for checking of the seals and cleaning of filter elements. The pressure drop indicates the contami­nation degree of the filter. To clean the filter element, the installation must be shut-down or the filter isolated. CLEANING Depressurize the filter chamber by means of the venting screw. Lift the housing cover, remove the filter ele­ment, rinse it with the cleaning fluid, e.g. BOLL-CLEAN 2000, and clean it by compressed air. (See operating instructions 'filter ele­ment cleaning'). TECHNICAL CHARACTERISTICS • Filter housing made of cast ductile iron (DN 25 to DN 80) or cast stain-less steel (DN 25 and DN 50) • Certified according to AD 2000, PED/DGRL97/23/EG and ASME SECT. VIII DIV.1 • Flanged connections according to DIN, ANSI, JIS • Filter elements: star-pleated O élé­ment or basket Q élément, option-ally as disposable element • Grade of filtration: 10 micron to 5 mm • Operating temperature: -10°C to 160°C ACCESSORIES • Differential pressure indicator optical / optoelectrical BOLL Simplex Filter with flanged connections DN 25-DN 80 optionally with integrated steam heating ■ Cover safety device Magnetic bar inside the filter element Steam heating Electrical heating Bottom fastening for filter size DN 65/80 ADVANTAGES • Minimal pressure losses • Most compact construction • Minimal number of components • Easy cover fastening with only two screws ■ Pressure stages /Dimensioning In-/Outlet DN 25 DN 32 DN 40 DN 50 DN 65 DN 80 Cast ductile iron PN 40 PN 40 PN 40 PN 40 PN 40 PN 40 Cast stainless steel PN 32 --- --- PN 32 --- --- Volume flow at Ap clean 0.1 bar; Oil 40 cS 5 m3/h 9 m3/h 14 m3/h 21 m3/h 35 m3/h 53m3/h Grade of filtration 50 Mm 83 l/min 150 l/min 233 l/min 350 l/min 583 l/min 883 l/min