| SAFETY PRECAUTIONS 1. Before starting the control, check all fuses and connections. 2. Proper consideration should be given to all rotating members. Before starting, be sure keys, pulleys, etc. are securely fastened. Proper guards should be provided to prevent hazards to personnel while the equipment is rotating. 3. Other mechanical considerations include proper mounting and alignment of products, and safe loads on shafts and gears. Do not depend upon gear friction to hoid loads. 4. The motor or gearmotor should be securely mounted (because of possible reaction torque). Test the motor/gearmotor unloaded to be certain that proper connections have been made. 5. If the motor/gearmotor does not start promptly and run smoothly, disconnect the AC power to the control. Double check ail wiring, and refer to "TROUBLESHOOTING" on page 33. 6. If the problem persists, contact your source of purchase or a Bodine Authorized Service Center and describe the problem in detail. Include all the nameplate data. Do not disassemble the product unless authorized by Bodine. Removing screws voids the Warranty. |