General Information

How to Order All stock items are available from Authorized Bodine Distributors. To order any stocked product just specify the model number. ”N” model numbers require lead time and minimum quantities. Gearmotor Mounting Positions The preferred mounting position for each gearmotor in this catalog is horizontal, as illustrated in their respective dimension diagrams. Gearmotor mountings other than shown are not recommended on some gearmotors due to (a) the possibility of gearhead lubricant leakage into the motor por-tion, (b) insuffi cient lubrication. By making the proper adjustments (normally done at the factory), mountings other than the preferred positions of gearmotors are possible. Applications Consistent performance, long life, and reliability are fundamental to Bodine designs. Since 1905 Bodine motors, gearmotors, and controls have been used in assembly equipment, conveyers, packaging equipment, copiers, lab instruments, photographic processors, medical and other scientifi c appara-tus... wherever component size, weight, reliability and integrity are prime considerations.If you need selection assistance, please contact your Representative or Distributor. To ensure proper selection and best service, please provide the following: • Your application and ambient conditions• Voltage and frequency• Direction of rotation, reversing • Maximum speed and speed range • Starting torque and running load • Duration of continuous run and rest periods• Size, weight, and noise limitations• Motor mounting position • Life requirement • Estimated annual requirementsFor existing Bodine applications, please provide the Type and Serial No.–both on the nameplate. Construction Recognition Most Bodine products are “third party approved”. The specifi c approvals for each product are shown on the appropriate pages.Motors and gearmotors conform to U.L. standard 1004 and CSA standard C22.2 No. 100. They are contained in U.L. fi le number E47177 and CSA fi le number LR2797.Electronic controls conform to U.L. standard 508 and CSA standard C22.2 No. 14. They are contained in U.L. fi le number E44529 and CSA fi le number LR26397.Equipment for sale in Europe must meet the require-ments of council Directive 72/23/EEC. The purpose of the EEC directive is to state minimum technical requirements common to all the member states within the European Union. These minimum technical requirements enhance safety levels both directly and indirectly. Compliance with these specifi cations is indicated with a on the equipment. Products in this catalog that show the CE mark on its dimensional page comply with the Machinery or Low Voltage Directives. The CE mark will be included on the motor rating nameplates. Depend-ing on the application, the use of optional terminal boxes and terminal strips may be required. Drives, modules, or systems (including motors) supplied as part of a customer’s machine are considered as components, and are not required to show the CE mark. It is the responsibility of the integrator or machine builder to gain acceptance of the entire machine. Motors with U.S. and Canadian approval may carry the Safety and Installation Precautions Bodine products are designed and manufac-tured to comply with applicable safety stan-dards. Since even well-built apparatus can be installed or operated in a hazardous manner, it is important that safety considerations be observed by the user. With respect to the load and environment, the user must properly select, install, and use the apparatus.It is the responsibility of the equipment manufac-turer or the individual installing the apparatus to take diligent care in installing it. Local electrical and safety codes should be followed when installing the apparatus to reduce hazards to persons and property.Bodine totally enclosed (IP- 44) products are not explosion proof nor dust-ignition proof. Bodine does not offer products for locations which are exposed to fl ammable/explosive gas, vapor or dust. An approved explosion proof or dust-ignition proof product is recommended for hazardous locations.For more safety information request Motor/ Gearmotor Safety, Installation, Use and Main-tenance Information PN 074 00045. and marks, or the mark alternatively. Bodine Handbook Download the Bodine Handbook at www.bodine-electric.com for the complete manual of fractional horsepower motors and gearmotors. The 244 page handbook is packed with valuable information including 25 pages pages of helpful articles, charts and a glossary of terms. Additional Product Information For additional product information please visit our Web site.
© Copyright 2006. Catalog data subject to change without notice. Printed in U.S.A. R

ii

www.bodine-electric.com Catalog S-16

MADE IN U.S.A.