Catalogs >
BlueSens gas sensor GmbH >
BlueSens Brochure

BlueSens Brochure
6Pages

Catalog excerpts

BlueSens – Gas analyzers for bioprocesses

The BlueVis software is the most convenient solution to operate the BlueInOne gas analyzers. It logs and visualizes the data and is a maintenance-tool for the monthly calibration as well. Now you can easily connect up to 12 analyzers to one interface of your PC. This Bioprocessing software calculates the oxygen uptake rate (OUR), carbon dioxide emission rate (CER) and respirator y quotient (RQ) automatically by the collected data of the BlueInOne analyzer and the given process parameters. No additional corrections of the data or manual calculations will be needed. The BlueVis software is...

Open the catalog to page 2

* Registered trademark. The MilliGascounter was developed at the University of Applied Science Hamburg under the leadership of Prof. Dr. Paul Scherer. The same sensors are also integrated in the BCpreFerm system, which is designed for process optimization (scale up) from flasks up to large-scale fermenters. The system comprises up to 12 sensors that are linked to a computer via an electronic multiplexer. The related software visualizes the results and calculates vital parameters such as the oxygen uptake-rate (OUR), the carbon dioxide emission rate (CER) and the respiration quotients (RQ)...

Open the catalog to page 3

Everything at a glance: product overview Sensor Measuring range Infrared, dual wavelengths Measuring principle Infrared, dual wavelengths (CO2) / ZrO2 (O2) Lifetime sensor element Approx. 3 years (CO2), 15,000 operating hours (O2) Housing Aluminum, IP 65 Dimension (WxDxH) mm Dimension (WxDxH) inch Weight Housing PA6 Dimension (DxH) mm Dimension (DxH) inch Weight Steel 1.4404 / Sapphire / Viton / PTFE Stainless steel / Viton / Sapphire / PTFE / Polymer H.L. / Nitrile G 1¼”, GL 45, Tri-Clamp, hose connection 4-12mm etc. Material in contact with gas Connection6 Operating temperature Storage...

Open the catalog to page 4

All the BlueSens‘ gas analyzers can be easily integrated directly into the gas lines independent of the gas flow. Additional gas coolers,pumps and valves are not needed to make the measurements. The sensors measure at the point where things are happening. Fast and reliable measurement data without a lot of maintenance are the result. With the aid of standard interfaces, the sensors can be connected to any process control system or computer. BlueInOne Cell Infrared, dual wavelengths (CO2) / Galvanic cell (O2) Galvanic cell Thermal conductivity Measuring range Measuring principle Approx. 3...

Open the catalog to page 5

Questions? Please ask directly! Phone BlueSens gas sensor GmbH Snirgelskamp 25 • D-45699 Herten (Germany) Phone +49 2366 4995-500 • Fax +49 2366 4995-599 e-mail: info@BlueSens.de

Open the catalog to page 6