| Work Smart - Not Hard with a Blue Giant Lift Table Common Structural & Design Features Every Blue Giant Lift Table is manufactured to the highest ANS standards and designed with dedicated attention to operator use and safety. ■ UL/CSA approved motor and electrical components ■ Velocity fuses on each cylinder to prevent platform free-fal for added operator safety. ■ Remote power pack is factory tested and prewired complete with NEMA standard hand held push button control. All blue giant Lift Tables have scissor legs made of solid plate steel for maximum rigidity. ■ Reliable Blue giant lift cylinders provide years of trouble free operation. A hard chrome ram and self adjusting polyurethane seals assure long life and reduced maintenance. ■ Pivot points are fitted with life-time lubricated bearings or teflon coated bushings to ensure smooth, maintenance free operation. ■ Hard chromed pivot pins are further evidence of the quality built into each lift table. Heavy duty torque tubes join the solid steel plate scissor legs assuring ultimate rigidity over full range of travel. Unique center ram thrust brackets designed to geometrically give best possible lifting capacity. The smooth deck plate is heavily reinforced including the peripheral members that are welded as a one piece platform to meet/exceed rated capacities. Electrical trip bar is mounted on all four sides of the table, stopping the downward travel of the unit upon contact with an obstruction. A recommended option for all open and pit installed units. |