© 2009 Racine Federated Inc., all rights reserved.
Printed in USA 11/09 Form No. 0016
WINDOWS is a registered trademark of Microsoft Corp.
GRAYLOC is a registered trademark of Oceaneering Int., Inc.
CSA is a registered trademark of Canadian Standards Association.
VICTAULIC is a registered trademark of Victaulic Company.
BLANCETT and QUIKSERT are registered trademarks of Racine Federated Inc.
FloClean is a trademark of Racine Federated Inc.
Repair Kits
Product Summary
The turbine meter repair kits are designed for use with Blancett
turbines and those of other turbine meter manufacturers. They
can be used in abrasive waterflood projects and hostile industrial
environments, as well as conventional applications. All repair kits
are factory calibrated and supplied with a unique K-factor for use
within each turbine's standard flow range. When combined with
the Blancett B2800
flow monitor, extended range calibrations
are available for improved accuracy. Repair kits are available for
Blancett Model 1100, QuikSert®, Model 200 and 900 and
FloClean™ turbine meters.
• Long and cost effective operating life
• Quick and simple installation, with no special tools required
• Prompt “off-the-shelf ” delivery on all standard sizes
The Frequency to Current (F to I) and Frequency to Voltage (F to V) converters
are active sensors designed to provide enhanced features and
greater output flexibility for Blancett turbine meters. These digital
signal processing devices measure and calculate the flow rate of a
turbine flow meter and produce an analog output proportional to
the flow rate. The converters are calibrated with the Blancett
turbine meters when ordered together, and an optional
Windows® -based software utility is also available for
in-field programming.
Frequency Converter
• Accuracy of frequency measurement is ±0.1%
• Offered with either a 4-20 mA or a 0-5 VDC output
• Ambient temperature up to 158 °F (70 °C)
• Two mounting styles available for ease of operation
The Blancett K-Factor Scaler converts the output of a Blancett turbine flow
meter, or other low-level frequency output, into a scaled square wave
output signal which then translates into the desired units of measure. The
output from the K-Factor Scaler can be recognized by almost any data
collection device. The K-Factor Scaler is available in an eight rotary
switch selectable model and a programmable version that is
pre-calibrated when ordered with a Blancett Series 1100 turbine meter.
• CSA Class I, Division 1 approval
• Operating temperature up to 158 °F (70 °C)
• Windows® -based software available for configuration
of programmable scaler
• Amplifies turbine meter pulse output
K-Factor Scaler
Racine Flow Meter Group
Flow Meters
®
Toll Free: 800-235-1638
Tel: 262-639-6770 Fax: 262-417-1155
8635 Washington Avenue, Racine, WI 53406-3738 U.S.A.
E-mail: info@blancett.com
