fluid-Check
Sensors
♦ Temperature sensor Type L thermocouple ♦ Temperature range -30 ... +120 °C ♦ Output 4 ... 20 mA / 2 wires ♦ Protection mode IP 65 ♦ Right-angle plug connection DIN43650 A ♦ Robust stainless steel housing Description In all industries, sheathed (mineral-insulated)
thermocouples are increasingly used for temperature measurement applications. Compared to other thermocouples and resistance
industrial thermometers, they respond to temperature changes more quickly and are smaller in size, which makes it possible to use them in constricted areas and places that are difficult to access. In addition, they are shock-resistant, pressure-resistant and excel by their long durability. The temperature sensor TS-1-A-120-3/8“ can be used for direct
temperature measurements inside pipes such as hydraulic and
lubricating oil pipes. In addition to its robust and compact design, it stands out by its high accuracy and its extensive measurement range. As a standard, the housing and all parts exposed to the liquid are made of stainless steel (Type 1.4571). Soft seals consist of Viton. Typical fields of application include systems and plant engineering, automation, air conditioning, and refrigeration. The patented measuring connector sc-2-... was developed for installation on pressureless
hydraulic pipes. After installation, the measuring connection can continuously be used, supporting operating pressures of up to 630 bar. The measuring connection Installation with serv-Clip 2 sc-2-... comes pre-mounted, including measurement coupling and needle. By screwing the measurement coupling onto the pipe, a specially shaped needle is pressed through the pipe wall. Afterwards the measurement coupling is unscrewed again. In the next step, the temperature sensor can be screwed into the serv-Clip . The measuring connection is completely tight and is ready for continuous use. Using the serv-Clip Pin 1 = Out / GND Pin 2 = +Vcc
® sc-2-... , the temperature sensor can be installed easily, quickly and safely even by non-technical staff. The whole process takes a few minutes only. No special tools are required for the installation of the serv-Clip and the temperature sensor. The system is completely tight, preventing any contamination of the hydraulic oil and ensuring sustained operational safety. The measuring connections are continuously available for measurement applications. Specifications Temperature range -30 ... +120°C Accuracy +/- 2 K Repeatability Better than 1 K Pressure range Up to P
B 630 bar Output signal 4 ... 20 mA Power supply 15 ... 30 V DC, protected against reverse connection Configuration 2 wires Protection mode IP 65 Linearity 0.2 % typ. / max. 0,5 % Threaded coupling G3/8“ male
Electrical connection Right-angle plug connection Type DIN 43650 A
Bolender Tel. (+49) (0) 2331 30 639-0 Service-Tel. 0700 BKM HAGEN Maschinenkonstruktion GmbH Fax (+49) (0) 2331 30 639-11 Service-Fax 0700 SERV CLIP Sedanstr. 41 Skype MSN SERVCLIP 58089 Hagen-Germany http://www.servclip.com E-mail: sales@servclip.de 20