Text version of the page

fluid-Check

Sensors

Temperature sensor TS-1-A-120-3/8“

♦

Temperature sensor Type L thermocouple

♦

Temperature range -30 ... +120 °C

♦

Output 4 ... 20 mA / 2 wires

♦

Protection mode IP 65

♦

Right-angle plug connection DIN43650 A

♦

Robust stainless steel housing Description TS-1-A-120-3/8“ can be used for direct temperature measurements inside pipes such as hydraulic and lubricating oil pipes. In addition to its robust and compact design, it stands out by its high accuracy and its extensive measurement range. As a standard, the housing and all parts exposed to the liquid are made of stainless steel (Type 1.4571). Soft seals consist of Viton. Typical fields of application include systems and plant engineering, automation, air conditioning and refrigeration.

for serv-Clip

®

2

In all industries, sheathed (mineral-insulated) thermocouples are increasingly used for temperature measurement applications. Compared to other thermocouples and resistance thermometers, they respond to temperature changes more quickly and are smaller in size, which makes it possible to use them in constricted areas and places that are difficult to access. In addition, they are shock-resistant, pressure-resistant and excel by their long durability. The temperature sensor

- No need cutting pipelines -

The patented measuring connector sc-2-... was developed for installation on pressureless hydraulic pipes. After installation, the measuring connection can continuously be used, supporting operating pressures of up to 630 bar. The measuring connection Installation with serv-Clip 2 sc-2-... comes pre-mounted, including measurement coupling and needle. By screwing the measurement coupling onto the pipe, a specially shaped needle is pressed through the pipe wall. Afterwards the measurement coupling is unscrewed again. In the next step, the temperature sensor can be screwed into the serv-Clip serv-Clip . The measuring connection is completely tight and is ready for continuous use. Using the Pin 1=Out / GND Pin 2=+Vcc
® sc-2-... , the temperature sensor can be installed easily, quickly and safely even by non-technical staff. The whole process takes a few minutes only. No special tools are required for the installation of the Installation with adaptor SC-XE-607 Special instructions for stainless steel up to 4 mm wall thickness with SC-2 can be provided. For pipes from 3” (88,9 mm) and wall thickness from 6 mm can be used the adaptor SC-XE-607. serv-Clip and the temperature sensor. The system is completely tight, preventing any contamination of the hydraulic oil and ensuring sustained operational safety. The measuring connections are continuously available for measurement applications.

TS with serv-Clip TS with SC-EX-607

Specifications Temperature range -30 ... +120°C Accuracy +/- 2 K Repeatability Better than 1 K Pressure range Up to P
B 630 bar Output signal 4 ... 20 mA Power supply 15 ... 30 V DC, protected against reverse connection Configuration 2 wires Protection mode IP 65 Linearity 0.2 % typ. / max. 0,5 % Threaded coupling G3/8“ male Electrical connection Right-angle plug connection Type DIN 43650 A Bolender Tel (+49) (0) 23 31 30 63 9-0 Service-Tel. 0700 BKM HAGEN Maschinenkonstruktion GmbH Fax (+49) (0) 23 31 30 63 9-11 Service-Fax 0700 SERV CLIP Sedanstr. 41 Skype MSN SERVCLIP 58089 Hagen-Germany http://www.servclip.de E-mail: sales@servclip.de