Text version of the page

serv-Clip

®

serv-Clip -2

for mounting on non-pressurized pipes

TUBE MEASURING CONNECTION

♦ Quick and cheap installation of a measuring point ♦ Pressure measurement when there is no connection ♦ Particle measurement according to ISO or NAS classes ♦ No longer necessary to cut open tubes ♦ For use up to 630 bar (9100 psi) working pressure ♦ For pipe thicknesses (up to 5 mm) ♦ Installation time for serv-Clip only takes a few minutes ♦ serv-Clip is registered trade mark of BKM Hagen / Germany

Description

The patented measuring connector sc-2-A... has been developed for mounting to pressureless hydraulic tubes. Following installation, the measuring connector is capable of permanent use for a working pressure of 630 bar (9100 psi). The measuring connector sc-2-A... is supplied in a pre- assembled state with measuring connector and needle. Screwing in the measuring connector presses a special-shaped needle through the wall of the tube. Afterwards the measuring connector is screwed out and the needle removed along with the stirrup and a pressure disk. The measuring connector is now screwed back into the serv-Clip. The measuring point is now sealed off and permanent pressure can be applied up to 630 bar (9100 psi). This connection is quick and simple to make and is also reliable. The whole process takes only a few minutes to complete. No special tools are required for mounting the serv-Clip. The system is fully sealed off. Contamination of the hydraulic fluid is ruled out. The operating reliability of the system remains intact. The measuring point is now permanently available for measurements.

Materials

Housing O-ring 9SMnPb28k Viton Sealing shell Measuring- needle St 37.4 58CrV4

Dimensions

D tubeType mm (A)H1H2H3BSW10 - L + S SC-2-A-101549944030 12 - L + S SC-2-A-121550954030 14 - S SC-2-A-141551964030 15 - L SC-2-A-151551,596,54030 16 - S SC-2-A-161552974030 18 - L SC-2-A-181553984030 20 - S SC-2-A-2020591045030 22 - L SC-2-A-2220601055030 25 - S SC-2-A-252061,5106,55030 28 - L SC-2-A-2820631085030 30 - S SC-2-A-3030741196530 35 - L SC-2-A-353076,5121,56530 38 - S SC-2-A-3830781236530 42 - L SC-2-A-4230801256530
D tubeType Tube (T)H1H2H3BSW3/8" SC-2-T-3/81549944030 1/2" SC-2-T-1/21550954030 5/8" SC-2-T-5/81552974030 3/4" SC-2-T-3/42058,5103,55030 1" SC-2-T-1"20621075030 1 1/4" SC-2-T-1 1/4"30751206530 Hydraulic tube 1 1/2" SC-2-T-1 1/2"30781236530 2" SC-2-T-2"30231389030

Other diameters (ID-NB) ins Pipe (P) available:

¼

”, ”, ½”, ¾”, 1”, 1

¼

”, 1½”, 2”, 2½”, 3”

Bolender Tel. (+49) (0) 2331 30 639-0 Service-Tel. 0700 BKM HAGEN Maschinenkonstruktion GmbH Fax (+49) (0) 2331 30 639-11 Service-Fax 0700 SERV CLIP Sedanstr. 41 Skype MSN SERVCLIP 58089 Hagen-Germany http://www.servclip.com E-mail: sales@servclip.de

12