Text version of the page

serv-Clip

®

serv-Clip -1

for mounting on pressurized pipes

TUBE MEASURING CONNECTION ♦ Quick and cheap installation of a measuring point ♦ Pressure measurement when there is no connection ♦ Particle measurement according to ISO or NAS classes ♦ No longer necessary to cut open tubes ♦ Measurement on hydraulic plants without switching off ♦ For use up to 630 bar (9100 psi) working pressure ♦ For pipe wall thickness up to 5 mm ♦ Installation time for serv-Clip only takes a few minutes ♦ serv-Clip is registered trade mark of BKM Hagen / Germany

Description

The patented pressure measuring clip is simply screwed onto the cleaned surface of the pressurised hydraulic tube. It is not necessary to interrupt the operation of the plant. A specially shaped steel needle is inserted through the wall of the tube above the screw head. The screw head is then screwed back. The created hole is then open and it is possible to measure the pressure immediately. This connection is simple, quick and safe to install. The procedure only takes a few minutes. No special tools are required to install the serv-Clip. The system is completely leakproof. Any pollution of the hydraulic liquid is impossible. It is not necessary to dismantle the measuring clip on completion of the measuring procedure in order to save costs. The operational safety of the hydraulic system is maintained. The measuring point remains permanently available for taking measurements.

Materials

9SMnPb28k Viton 58CrV4 Sealing shell Screw head St 37.4 9SMnPb28k Housing O-ring Measuring- needle

Dimensions

D tube type mm (A)H1H2H3BSW10 - L + S SC-1-A-1015691284030 12 - L + S SC-1-A-1215701294030 14 - S SC-1-A-1415711304030 15 - L SC-1-A-151571,5130,54030 16 - S SC-1-A-1615721314030 18 - L SC-1-A-1815731324030 20 - S SC-1-A-2020741335030 22 - L SC-1-A-2220751345030 25 - S SC-1-A-252076,5135,55030 28 - L SC-1-A-2820781375030 30 - S SC-1-A-3030791486530 35 - L SC-1-A-353081,5140,56530 38 - S SC-1-A-3830831426530 42 - L SC-1-A-4230851446530 D tubetype Tube (T)H1H2H3BSW3/8" SC-1-T-3/815691284030 1/2" SC-1-T-1/215701294030 5/8" SC-1-T-5/815721314030 3/4" SC-1-T-3/42078,5137,55030 1" SC-1-T-120821415030 1 1/4" SC-1-T-1 1/430951546530 1 1/2" SC-1-T-1 1/230981576530 2” Tube in Type 2 available (Page 12) Other diameters (ID-NB) ins Pipe (P) available: Type 1 : ½”, ¾”, 1” Type 2 :

¼

”, ”, ½”, ¾”, 1”, 1

¼

”, 1½”, 2”, 2½”, 3”
Bolender Tel. (+49) (0) 2331 30 639-0 Service-Tel. 0700 BKM HAGEN Maschinenkonstruktion GmbH Fax (+49) (0) 2331 30 639-11 Service-Fax 0700 SERV CLIP Sedanstr. 41 Skype MSN SERVCLIP 58089 Hagen-Germany http://www.servclip.com E-mail: sales@servclip.de 7