HCL Push-Pull Pickling line - BKM Bolender Maschinenkonstruktion GmbH - #1

Text version of the page

Gerd Wolff Maschinenfabrik GmbH Sedanstraße 41 Tel.: +49(0) 23 31 92218- 0 www.gerd-wolff.com D-58089 Hagen Fax: +49(0) 23 31 92218-18 info@gerd-wolff.com BKM Bolender Sedanstraße 41 Tel.: +49(0) 23 31 30639-0 www.bkm-hagen.de Maschinenkonstruktion GmbH D-58089 Hagen Fax: +49(0) 23 31 30639-11 mail@bkm-hagen.de Optimum strip surface oiling Compact design Low heat loss All in one hand Cost cutting due to compact construction Our HCL push-pull pickling line is designed for an annual output of about 250,000 tons of hot rolled strip. Unlike other lines, this line is of extremely compact design. The resulting is saving of footprint area and energy cuts operating costs substantially. The units are set up in and on a concrete foundation with appropriate isolation. The tanks, heat exchangers and piping with acid of about 80 centigrade are located in closed, isolated spaces beneath the pickling pits. This design keeps heat of loss as low as possible. After pickling the strip is dried and the edges can be trimmed. In addition to optional passivation, exactly metered quantities of oil can be applied to the strip surface. HCL PUSH-PULL PICKLING LINE Specifications: Direction: from left to right System speed: 50 (70) m/min Material: Strip steel Strip width: 400 – 1,500 mm Strip thickness: 2.0 – 6.0 mm Number of part strips. max.: 1 strip Uncoiler retraction, max.: 600 kp Coiler pull, max.: 1,800 kp Main drive output, max. Uncoiler: 20 kW Rotary edge cutter frame: 4x5.5 kW Edge scrapper: 32 kW Coiler: 110 kW Coil and data Uncoiler Coil ID: 500 / 762 mm Coil OD: 2,000 mm Coiler Coil ID: 508/ 610 mm Coil OD: 800 – 2,000 mm 1500 mm1500 x 6 mm All in one hand