HDS2 - Bishop-Wisecarver - #51

Technical Specifications V Slides a Flat Tracks

Material and finish: High carbon bearing steel, hardened on running faces. Those areas which are ground

have N5 surface finish. Other areas have a chemically blackened finish.

Material and finish: Special martensitic stainless steel conforming generally to AISI 420 series, ground on

all main surfaces to N5. Hardened on running faces.

Bearings rings, balls & rollers: Carbon-chromium bearing steel AISI 52100, hardened and tempered

Seals: Cage: Studs:

Temperature range:

Nitrile rubber Plastic, metal for ..HJR150.. & ..HRR144., High tensile steel, chemically blackened finish -20°Cto+120'C

Bearings rings, balls & rollers: Stainless steel AISI 440C, hardened and tempered

5S.HJR150.. & SS.HRR144.. contain a steel twin taper roller bearing

Seals: Nitrile rubber

Cage: Plastic

Studs: Stainless steel AISI 303

Temperature range: -20°C to+120'C

Material:

Finish:

High strength aluminum alloy Clear anodized to liumthicknes

Material: Fixings:

Temperature range:

Body: Impact resistant plastic Wipers: Felt

Stainless steel grades AISI 304 or 31 ó -20°C to +ÓCTC

............................, ...... Grease HLGI consistency No. 2

Large series bearing cap wipers, all roller f Oil 68 cSt or similar. Food

cap wipers and all lubricators: c

i pati I be used.

le lubricants

may also

Coefficient of friction (without cap wiper or lubricators) = 0.02. Cap seals and lubricators add friction as follows:

4 cap wipers per carriage: CWo4 or CW95 = 5N

CW120, CW123 or CW150 = ION

4 lubricators per carriage: HDLB25 = 2.5N

HDLB33 = 5N

HDS2 V tlide and Hat track system can operate at very high speeds, up to 10m/s in some instances. Speeds are dependent on stroke, duty and environmental conditions. Please contact Bishop-Wisecarver to discuss application requirements. Stated speeds do not apply to rack driven systems.

Please visit our web site www.bwc.com/products/hds.hhnl.