HDS2 Heavy Duty Slide System - BISHOP WISECARVER - #39

Bishop-Wisecarver can provide modifications to the standard cap wipers and lubricators so that they can be easily connected fo a centralized lubrication system. Adding threaded inserts to locations on the lubricator and cap wiper body allows threaded connectors to be fitted so that oil lubrication can be fed directly to the felt wipers. Inserts with M4, MS and M6 threads are available as standard. Other sizes are available on request.

All types and sizes of lubricators as detailed on 34 can be fitted with

threaded inserts at the lubrication point, Please refer to that page for

positions. Standard fitted inserts may be ordered by adding a suffix, as shown below, to the lubricator part number 34.

Threaded inseri

State lubricator part number 34 followed by: C4 for M4 insert. CS for MS insert.

C6 for M6 insert.

All types and sizes of bearing cap wipers and roller cap wipers as detailed on ■ ,32 & 33 can be fitted with threaded inserts. Inserts may be fitted on either one or both ends of the wiper body or, at one or both oil lubrication positions in the back face 32 & 33. The small series cap wipers are available only with inserts fitted at the ends*². Oil lubrication into the felt wiper of one end of the wiper body is generally sufficient to ensure carry over of lubricant to the felt insert on the other side of the body (see automatic lubrication excimple at the bottom of the page). This allows an outboard scraper to be fitted at the opposite end to the insert if required.

^—Bear inerti

State bearing cap wiper / roller cap wiper part number 32 & 33 followed by: C4 A- Choose Insert position A - D

C4 for M4 insert. CS for M5 insert. C6 for M6 insert

D'3

1 . Roller cap wipers CW144 and bearing cap wipers CW15Û have insert dimension 22mm from the wiper mounting

base. All others have a dimension of 12mm. 2. Insert positions C & D are not available for small series bearing cap wipers CW64 & CW95,

Threaded inserts for cap wipers and lubricators enable them to be linked to a central lubrication point or pressure feed canister.

Bishop-Wisecarver is able to supply carriages with linked lubrication devices according to the customer's preferred layout. The illustration sJtows one of the" many possibilities.