Motion Without Limits

™

Mechanical Ancillary Components Part Number

T Nut - Quick fit type can be inserted into a T slot and rotated through 90° to engage. RTN8M6 Heavy duty type recommended for arduous applications and on light beams. TN8M6T Slot Cover - An extruded UPVC cover available in lengths up to 8000mm. One is TC8-1234 required per T slot. The last 4 digits relate to the length in mm. Fixing Clamp - Specify size 3 or 4 depending on the size of DLS unit, DFC 3 L and S (short) or L (long). Switch Bracket - Allows standard V3 pattern microswitches to be attached to the DLS. DSB8 These come with the T nut and screw required to fix them to the DLS beam. Switch Cam - Fixes to the DLS carriage to operate microswitches fixed with switch brackets DSC 3 Specify 3 or 4 or 3C depending on the size and type of unit. If this component is ordered with the DLS, the unit will be supplied with suitable fixing holes. Drive Shaft - Connects between the output shaft and the input shaft of two parallel DLS axes GX 2 - D4- L 900 (see page 12). GX1 and GX2 have torque capacities of 10 and 30Nm respectively. The digit 3 or 4 following the D relates to the size of DLS units. The L 900 dimension is the length of the shaft (see page 12). Shaft Support - A pillow block type housed bearing to support the shaft where the DLS units STL 40Bearing are widely spaced or fast moving. See page 12 for when to specify. STL 30 suits GX1 shafts, 40 suits GX2 shafts.

Electrical Components Part Number

Speed controller - Intelligent speed controller to drive AC motors fitted to DLS 160 AA 02 NPS1 P1 Model Series - 160 indicates the Allen-Bradley Bulletin 160 range Supply Type - S-AA for 200-240V 1Ø, -AA for 200-240 3Ø & -AB for 380-460V 3Ø Power Rating - 02 for 0.37kW (2A), 03 for 0.55kW (3A), 04 for 0.75kW (4.5A) & 08 for 1.5kW (8A) Control Mode - NPS1 indicates the preset speed model, NSF1 indicates analog signal follower model Keypad Module - P1 indicates that the unit is fitted with the programming keypad Line Filter - All the above units are supplied with a separate line filter - see page 15. Capacitor Module - 160S-CMA1 suits 200-240V 1Ø, 160-CMA1 suits 200-240V 3Ø & 160-CMB1 suits 380-460V 3Ø The capacitor module is supplied as standard with 1.5kW 1Ø 200-240V unit. Dynamic Braking Module 160-BM A 1 Supply Type - A indicates 200-240V 1Ø & 3Ø, B indicates 380-460V 3Ø Power Rating - 1 suits inverter powers up to 0.75kW, 2 suits 1.5kW drives roller actuator and is sealed to IP67. The inductive version DLS V7SWI is also sealed to IP67. Both switches are supplied with flying leads. Limit & Home - Standard V3 pattern microswitch. The mechanical version DLS V7SWM has a DLS-V7SW MSwitch
© Bishop-Wisecarver Corporation 2007. All rights reserved. www.bwc.com 888.580.8272

23