Text version of the page

DGT50 STROBOSCOPEDGT50 STROBOSCOPE

ADJUSTABLE HIGH BRIGHTNESSADJUSTABLE HIGH BRIGHTNESS

EXTERNAL / INTERNAL TRIGGEREXTERNAL / INTERNAL TRIGGER PHASE SHIFTER CIRCUIT and TTL OUTPUTPHASE SHIFTER CIRCUIT and TTL OUTPUT SUITABLE FOR FIXED MOUNTING and CONTINUOUS USESUITABLE FOR FIXED MOUNTING and CONTINUOUS USE ADDITIONAL SEPARATED LAMPS AVAILABILITYADDITIONAL SEPARATED LAMPS AVAILABILITY RANGE UP TO 5.000 FLASHES/MIN (RPM) WITH LCD DIGITAL SPEED READOUT HIGH BRIGHTNESS FLASH LAMP, ADJUSTABLE ON THREE INTENSITY FLASH CONTROL BY INTERNAL OSCILLATOR AND BY EXTERNAL TRIGGER

DGT50 + ADDITIONAL LAMP

PHASE SHIFTER CIRCUIT TO SHIFT THE ANGLE OF OBSERVATION ON 360° AND O-5V TTL OUTPUT FAN-COOL EQUIPPED FOR LONG TIME CONTINUOUS USE AUTOMATIC FLASH DIVIDING FUNCTION :2 :4 SUITABLE FOR FIXED MOUNTING OR PORTABLE USE RUGGED, RELIABLE, COMPACT AVAILABILITY TO ADD UP TO 5 SEPARATED LAMPS TO INCREASE FLASH LAMP BRIGHTNESS AND ILLUMINATED AREA FULLY COMPLIES WITH CE DIRECTIVES DESIGN AND OPERATION

The DGT50 stroboscope is a professional instrument with high performances and reliability, ideal for hard continuous use in production and maintenance industry, whenever a high brightness of flash lamp it is necessary. The synchronization of the flash lamp occurs by means of external trigger (with tachimetric function) such as the internal oscillator with coarse and fine regulation for a quick and precise adjustment. Revolution readout in RPM is easy thanks to a large dot matrix lcd display. The phase shifter circuit permits an image shifting on 360°, to obtain the angle of observation into the most favourable position. The DIV function (automatic dividing function :2 :4) allows to observe fast movements at lower flash frequencies, however obtaining the stopped image with a higher brightness and a longer life of xenon lamp. The internal xenon lamp provide a high brightness flash lamp, adjustable on three intensity, that allows a perfect illumination of the observed object also at low motion frequences. Additional separated lamps are available, to further increase the intensity of flash lamp and illuminated area. Instrument is equipped with a fan-cool to permit a long time use, and of a standard 0-5V TTL output, to connect external devices. The DGT50 stroboscope is suitable for a fixed mounting near the object to be illuminated, such as for a portable use. The instrument is encased in a rugged, high-impact plastic housing, with handle for the best portability.

APPLICATIONS

The DGT50 stroboscope is always used wherever motion sequences have to be analysed or rotation speeds have to be measured in production and maintenance industry : observation on textile and printing machines – quality control – observation of mechanical deformations – packaging – laboratories – cavitation studies on turbine and other hydraulic machines - etc.

TECHNICAL CHARACTERISTICS BINT DGT50 STROBOSCOPETECHNICAL CHARACTERISTICS BINT DGT50 STROBOSCOPE

FREQUENCY RANGE 100 – 5.000 flashes/min (RPM). FLASH CONTROL by internal oscillator - by external trigger. INTERNAL OSCILLATOR in two range, coarse and fine adjustments. EXTERNAL TRIGGER electric signal >1V - photocells - inductive sensor - microswitch. DISPLAY by means of dot matrix lcd display. RESOLUTION 1 RPM. DELAY TIME variable from 0,1 to 60 ms. approx. TTL OUTPUT TTL 0-5V standard DIVIDING FUNCTION :2 :4 on internal oscillator and external trigger. LAMP long life xenon white light tube. FLASH ENERGY 100 – 250 mWs/flash
(depending on frequency range and brightness). POWER SUPPLY 220 Vac – 50/60 Hz. DIMENSION 160 x 140 x 230 mm. WEIGHT 1,000 kg. ACCESSORIES (optional) separate lamp EL50 - articulating arm extension 70 cm - inductive sensor - photocell - carrying case.
BINT reserves the right to change specifications or design without prior notice.