PED (module A/A1, B+F, G) The sensors 1-Pin-Sensor ensures an identical fl ow. The classic and the AD 2000 for pressurized components Sensors for thermal gas fl ow measurement have the advantage that they are designed for minimal pressure loss with no mechanical moving parts. The COMBIMASS 1 1/2-Pin-Sensor ; however, there is less infl uence on the fl ow direction.
® measurment systems also in the case of high pr and can be used without subsequent inspection of the plant. 2-Pin-Sensor which is dependent of the fl ow direction is considered as an uncomplicated standard solution and is suitable in the case of fast-changing process temperature. In the case of a essures and process temperatures up to 800 °C hot tapping units are used to insert or retract the sensor for control, cleaning or maintenance also during operation without any process disruptions. All sensors are manufactured with tested welds. Therefore they meet the requirements of the . Special manual or hydraulically operated COMBIMASS The sensor heads are heavy duty and made out of one- piece bar stock of stainless steel
® Sensors are robust, corrosion-resistant and require minimal maintenance. or more signifi cant materials without weldings. For all probes, specially developed sensor elements of the latest generation are used. Production Process and Quality Control guarantee high-precision measuring elements with excellent accuracy and long- time stability. Due to its rotationally symmetrical design, the All COMBIMASS
® fl ow meters are alsoavailable in explosion proof EEx(ia) or EEx(ed) version for zone 0 , 1 , 2 , 21 and 22 and meet the highest safety standards according the ATEX regulations. With stainless steel fi eld housings , they are especially suitable for process applications in the chemical and petrochemical industries. COMBIMASS
® multipoint system is also used when profi le distortions that occur with large nominal diameters or rectangular ducts are to be expected. They measure the fl ow velocity of gases at various points and average the individual readings. corrosive, aggressive or abrasive gases
® in action and combustion gases such as nitrogen, argon, oxygen, carbon dioxide, super- heated steam or propane, butane, etc. Sewage treatment and environmental technology: Measurement, balancing, control and distribution of aeration air, biogas, natural gas, ozone and oxygen. Measurement and monitoring of exhaust air, waste gases, low temperature carbonization gas, fl ue gas, etc. 6 For sterile application or gas mixtures. State-of-the-art technology and high safety standards allow the use of COMBIMASS , for example in pharmaceutical or food industry, COMBIMASS ApplicationsGeneral industries Flow rate measurement, recording and balancing of compressed air, industrial
® sensors with highly-polished surface and special process connections are available. In addition, models made of Titanium, Tantalum, Inconel or Hastelloy are used to measure COMBIMASS
® fl ow conditioner COMBIMASS
® fl ow conditioners are used in the case of a complex pipe geometry, bends, reducers, fi ttings or pulsation of the gas fl ow. They balance out almost without any pressure loss the fl ow profi le and ensure that there are reproducible conditions at the measuring point. With COMBIMASS
® fl ow conditioners, the measuring section is only up to 3–7 fold of the pipe diameter. They are robust, insensitive to dirt and guarantee the highest measurement accuracy.