video corpo

Measuring Instruments
20Pages

{{requestButtons}}

Catalog excerpts

Measuring Instruments - 1

BIG MEASURING INSTRUMENTS High precision instruments to ensure fast and accurate operations

Open the catalog to page 1
Measuring Instruments - 3

Overview Touch Sensors 4 Retention Force Dynamometer 12 Digital Leveling Device 15 Tool Assembly Fixture 16

Open the catalog to page 3
Measuring Instruments - 4

Point Master Pro Series Point Master Pro Series is a precision 3-D touch sensor operating in non-conductive as well as conductive applications, resin, ceramic or coated workpieces, machines with ceramic spindle taper or bearings can all be accommodated. • LED lamp • Repeatability ± 1 μm • For all materials Battery Life Standard Stylus (included) ST28-4R 1. PMP-10 has one LED only. 2. Above table indicates the specification when using stylus ST28-4R. 3. There is approx 5 μm lag in X and Y directions and approx. 2 μm lag in Z direction to illuminate LED lamp when stylus touches workpiece...

Open the catalog to page 4
Measuring Instruments - 5

Point Master Pro Series HSK Type Model Fig. HSK No. L LI Over-Travel Measuring Battery Battery Life Standard Weight Order No. Pressure (N) (not included) Stylus (kg) 1. There is approx 5 pm lag in X and Y directions and approx. 2 pm lag 2. Above table indicates the specification in Z direction to illuminate LED lamp when stylus touches when using stylus ST28-4R. workpiece surface. 3. Battery is not included. 1. Measurement is not possible with non-conductive machine or workpiece. 2. Point Master PMC utilizes conductivity from the machine, toolholder. Point...

Open the catalog to page 5
Measuring Instruments - 6

Point Master PMG Series LED lamp illuminates when the stylus touches the workpiece. • LED lamp • Repeatability ± 1 μm • For electric conductive materials Machine spindle With stylus ST38-6P Model Point Master Battery life Standard Stylus (included) ST38-6P ST38-6x6 1. Measurement is not possible with non-conductive machine or workpiece. 2. Point Master PMG utilizes conductivity from the machine, tool holder, point master through workpiece. 3. Battery is not included. Alternative Stylus The stylus (M3 thread) is replaceable. Please replace when different model of stylus required or if...

Open the catalog to page 6
Measuring Instruments - 7

Base Master Series Base Master Series is a precision touch sensor to determine workpiece offsets and tool length. Mounted on workpiece surface or machine table, LED lamp illuminates immediately when the cutting edge touches the sensor plate and the position is detected. The most popular Base Master model with 1pm accuracy. Operates when a conductive circuit is completed. • LED lamp • For use with conductive cutting tools, workpieces, and machine tools. Height Accuracy Base Master Gold Suitable for various tools and workpieces, including non-conductive materials such as ceramics. • LED lamp...

Open the catalog to page 7
Measuring Instruments - 8

Touch Sensor Base Master Series Base Master Red Tool Offset Sensor • LED lamp • For all materials, including non-conduc- tive cutting tools,workpieces, and machine tools • Replaceable sensor plate, BM-MEG, is available as individual part Model BM-MEG Sensor Plate Repeatability Accuracy Min. Measureable Tool Diameter Measureable Pressure Sensor Stroke Signal Battery Weight Height Accuracy Sensor Part Base Master Mini Batterie Battery (SR44x2) Magnet 1. Protection cover is included. Protection Cover Height Accuracy Measureable Pressure Repeatability Accuracy Min. Measureable Tool Diameter...

Open the catalog to page 8
Measuring Instruments - 9

Touch Sensor / Edge Finder Tool Master Tool Master is a precision touch sensor with a large dial gauge. LED lamp and sound pre-indicate approach to 100 mm height to ease the detecting operation. Metric Dial Indicator Indication Tolerance Return Tolerance Audible Beep Dial Guage Stroke Stroke Range Measureable Pressure Battery Weight Graduation Sensor Plate Lamp (LED]) Height Accuracy • LED lamp • Visible dial indicator Tool Offset Sensor 1. Dial gauge accuracy in accordance with JISB7503:2011. 2. Battery is not included. Accu Center Accu Center is a simple and precise edge finder offering...

Open the catalog to page 9
Measuring Instruments - 10

Overview Touch Sensors Base Master Series Model Applicable Materials Height Repeatability Min.measureable Tool Diameter Features Electric Conductive Materials Most universal type Best for micro tools Compact body design ± 1 pm (2 a) Replaceable sensor Unit 3 pm Visible dial indicator Point Master Series Model

Open the catalog to page 10
Measuring Instruments - 11

Alignment Tool for ATC arm For maintenance of machine tool spindle. Measuring equipment of misalignment between the ATC arm and machine tool spindle or magazine pot center. How to use • Load the AL Shank in the machine spindle and mount the AL Flange on the ATC arm. • Insert the AL Plug into the AL Flange. • Rotate the AL Plug and read the highest and lowest values of the dial indicator. This direction is the eccentric direction. Half of the gap of the values is the eccentric amount. • Adjust the position of the ATC arm so that the front end of the AL Plug will be inserted into the AL...

Open the catalog to page 11
Measuring Instruments - 12

Retention Force Dynamometer Measuring device for pulling force of machine tool spindle 1. Each component is also available separately. Please contact BIG KAISER agent if individual component is required. 2. SBT30-DF10 is designed exclusively for machines not capable of automatic tool change. 3. SBT30-DF10 is suitable for BT/BBT30 machines only. 4. Pull stud bolt is to be ordered separately. For DIN, ISO, ANSI & CAT standard machines, exclusive pull stud bolt for dyna force is required. 5. SNT50-DF30 marked with * is a light-weight model. Exclusive pull stud bolts for Dyna Force An exclusive...

Open the catalog to page 12
Measuring Instruments - 13

Dyna Test (BT Shank) Periodic inspection of machine tools to control production stability. Shorter models are ideal for measuring ATC repeatability. L Effective test length A 1. Taper length is in accordance with JIS BT standard. Conventional BT and BIG-PLUS BT type Effective test length A 1. Taper length is in accordance with JIS BT standard. Dyna Test (DV Shank) Periodic inspection of machine tools to control production stability. Effective test length A

Open the catalog to page 13
Measuring Instruments - 14

Dyna Test (HSK Shank) For inspection and adjustment of machine spindle. Effective test length A 1. The drive key slots are symmetrical to allow the HSK form A dyna test bar to be indexed 180 degrees. Effective test length A Effective test length A

Open the catalog to page 14

All BIG KAISER catalogs and technical brochures

  1. Turning Tools

    40 Pages

  2. News 2016

    20 Pages

  3. Speroni Magis

    20 Pages

Archived catalogs

  1. Speroni Futura

    24 Pages