N/C LATHE TOOLING Coolant-through hole STOPPER Type Flange as a stopper enables presetting of the tool away from machine and minimizes downtime. Shank is designed to be directly mounted into the drill holder of turret. Adjustable Cutter Length H 1. NEW BABY NUT is included. 2. Designed to be capable of supplying coolant through the body. 3. "H" indicates the adjustment length with an Adjusting Screw. Spare Parts Accessories WRENCH BABY PERFECT SEAL G 10 ADJUSTING SCREW Adjusting Screw (Option) For applications using the sealed collet nut BABY PERFECT SEAL, please order nut-less version of the...

STANDARD Type Versatile as a basic holder for drills, taps, reamers and small tool bits. Adjustable Cutter Length H Adjustable Cutter Length H 1. NEW BABY NUT is included. 2. Designed to be capable of supplying coolant through the body. 3. "H" indicates the adjustment length with an Adjusting Screw. L Adjusting Screw (Option)

Adjustable Cutter Length H L1 L Adjusting Screw (Option) Adjusting Screw 1. Nut is not included. Refer to the "Accessories" table below and select the suitable nut according to applications. 2. Designed to be capable of supplying coolant through the body. 3. "H" indicates the adjustment length with an Adjusting Screw. MEGA ER PERFECT SEAL G 14 MEGA WRENCH ADJUSTING SCREW Coolant-through hole Adjusting Screw Flat is provided on the shank to be mounted in the tool post of the NC lathe directly. Model 1. Nut is not included. Refer to the "Accessories" table below and select the suitable nut according...

N/C LATHE TOOLING Coolant-through hole MEGA MICRO CHUCK Smaller nut diameter than body allows installation into toolholder of small lathes from the back side. Model MEGA WRENCH MICRO COLLET 1. MEGA NUT is included. 2. Designed to be capable of supplying coolant through the body. Spare Parts MEGA MICRO CHUCK Rigid tapping attachment with error compensation MEGA SYNCHRO Tapping Holder Improves thread quality and tool life by reducing thrust loads caused by synchronization errors up to 90%. 22 RIGID TAPPING 1. MEGA NUT is included. 2. MEGA WRENCH and common spanner (12mm) are required to clamp/unclamp...

AUTO TAPPER TYPE B DEPTH CONTROL Ideal for blind-hole or pipe tapping with depth control. Designed with minmum projection to clear space limitation on turret. L Tap Collet type TC (Option) 1.Tap Collet type TC is ordered separately. 2. Not available for left-hand threading. 3. F2 in the table is tension amount to reach neutral position. SYNCHRO TAPPING HOLDER TYPE R RIGID TAPPING Radial float eliminates misalignment of center between machine spindle and tap. Small axial float compensates for synchronization errors and minimizes thrust loads on a tap. Tap Collet type TC (Option) TENSION F2 F1...