catalogue search
P. 01
P. 02
|
|
You may also be interested in
Valve, Distribution block, Pneumatic manifold, Manifold, Flow regulator
Text version of the page
| MINIATURE 1:1 PRESSURE TRANSMITTER DESCRIPTION | |||||||||||||||||||||||||||||||
| Type PR | |||||||||||||||||||||||||||||||
| KLAY miniature 1:1 pressure repeater has been developed for measuring pressure from plugging fluids, in pulp-and paper or other types of industry, where plugging is a problem. The small diameter of the transmitter (25.8 mm / 1") permits flush installation with the inside wall of pipes over 50 mm (2") and thereby avoids the pocketing problems encountered with conventional flange mounted pressure transmitters and chemical seals. Its accuracy is not effected by temperature changes which is in sealed systems often a problem. RANGES available from 1 to 10 bar, ranges below 3.7 bar need a minimum air supply of 4.2 bar. ranges above 3.7 bar need a minimum of 0.5 bar above process pressure as supply pressure. ACCURACY i 0.01 bar throughout range, zero error less than 0.07 bar. repeatability better than 0.03% from span. | |||||||||||||||||||||||||||||||
| Dimensions (mm) | |||||||||||||||||||||||||||||||
| ORDERING INFORMATION | |||||||||||||||||||||||||||||||
| KLAY 1:1 pressure transmitter including a SS 316 L weld-on nipple(033 mm). Order code is shown below, specify the range. | |||||||||||||||||||||||||||||||
| KLAY- PR - 7 BAR - V - HA - HT | |||||||||||||||||||||||||||||||
| ORDER CODE: | |||||||||||||||||||||||||||||||
| MODEL- RANGE (SPECIFY)- O-RING (VITON)- DIAPHRAGM (HAVAR) — TEMPERATURE (200"C) - | |||||||||||||||||||||||||||||||
| - Available on request special O-rings (extra price) - Available on request Hastelloy C wetted parts (extra price) Use our type LT-SAN lor ranges lower than 1 bar or on level applications. | |||||||||||||||||||||||||||||||
| Paris description 1 • Sal screw -. washer 2 ■ Outer 0-rmg - Vlton 3 Diaphragm ring - 310 S/Q 4 ■ Inner O-nng 5 • Diaphragm - Havar | |||||||||||||||||||||||||||||||
| 11 • Disc litter • S<S 12 Fitter adapter air supply 13 - Finer disc - S/S 14 - Rubber dumper 15- Rear lock nng | |||||||||||||||||||||||||||||||
| 6 ■ Repealer body 7 Weld-on nipple- 316 L S/S a Noodle valve ■ S/S 9 • Needle valve O-nng 10 Frlter adapter output | |||||||||||||||||||||||||||||||
| Ni|verheidsweg 5 7991 CZ DWINGELOO PO Box 13 7990 AA DWINGELOO The Netherlands Tel 10)521-591550 Fax [0)521-592046 | |||||||||||||||||||||||||||||||
| KLAY-INSTRUMENTS B.V. | |||||||||||||||||||||||||||||||