Catalogs >
BEUMER Group GmbH & Co. KG >
BEUMER Loading Equipment for Bulk Material

BEUMER Loading Equipment for Bulk Material
20Pages

Catalog excerpts

CONVEYING TECHNOLOGY LOADING TECHNOLOGY PALLETIZING TECHNOLOGY PACKAGING TECHNOLOGY DISTRIBUTION SYSTEMS Loading equipment

Open the catalog to page 1

BEUMER LOADING TECHNOLOGY Large quantities of bulk materials must be transported by road and by rail. These bulk materials, whether building materials, coal, grain, animal feed, mineral aggregate or products from the chemical industry, are frequently loaded at the production site and transported as mass bulk material to their sites of use by means of appropriate vehicles. fic products and exactly adjusted to the assembly conditions. bulk density, product temperature and flow behavior. During the design phase the characteristics of each type of material to be loaded need to be considered, in...

Open the catalog to page 2

Loading head for tanker vehicles Loading head with integrated filter Filling level monitor / Optional equipment Mobile loading head for tanker vehicles Loading head for open vehicles Material feed and metering Automatic dispatch control system

Open the catalog to page 3

Loading head for tanker vehicles Tanker vehicles can be loaded quickly and free of dust by means of the BEUMER bulk loading head. It is designed according to the double-wall system i.e. material flow and dust extraction are separate from one another. The loading head must be connected to a dust-collecting air system. The lifting device is a motorized or manual cable winch. The material feed must be dosed. The device is operated by means of a suspended push-button switch. When setting down on a filling spout, the sealing cone of the loading head lowers further and simultaneously opens the...

Open the catalog to page 4

Technical data material inlet motor winch dust extraction flange bellows and telescoping component vibrator (option) control cabinet conical seat sealing cone suspended push-button filling level monitor Loading capacity

Open the catalog to page 5

Loading head for tanker vehicles with integrated filter The advantage of the BEUMER bulk loading head with integrated compressed air filter is its independence from a central dust extraction and transport system, which is too costly to install just for connection to a bulk loading unit. The dust removed from the vehicle is fed back to the material infeed during the loading process. The compressed air filter consists of filter bags located between the interior telescopic material feed tube and the outer bellows. A fan on the exterior extracts the dust. The unit is cleaned by jets of...

Open the catalog to page 6

Technical data material inlet motor winch bellows with filter and telescoping component compressed air connection guard and guide ring vibrator (option) control cabinet suspended push-button conical seat sealing cone filling level monitor Loading capacity

Open the catalog to page 7

Filling level monitors for loading heads The filling level monitor serves to accurately shut off the material feed to the loading head when the vehicle is full. Different types of filling level monitors are required depending on the properties of the material being loaded. The primary criteria used to select the correct switch are the bulk density, flow behavior as well as the product temperature. All systems are interchangeable. This ensures quick and trouble-free conversion if required. Capacitive switch Paddle wheel switch Vibration probe Air-contact switch

Open the catalog to page 8

Optional equipment cross sliding inlet chute stabilized bellows imbalance-type vibrator hand winch For all BEUMER bulk loading heads various additional modules and special models are available. • Hand winches instead of motorized winches for minor applications • Inlet chutes with electromotive cross slide device. If the tanker vehicle is not located exactly in the center of the loading lane it is possible to adjust the loading head position to both sides. • Imbalance-type vibrator for automatic self-cleaning which is activated after each loading process to prevent dust accumulation on the...

Open the catalog to page 9

Mobile loading equipment for tanker vehicles With very large loading requirements, for example in the cement industry, stationary loading heads are no longer sufficient, particularly in those cases where the vehicle is positioned on a scale during loading and cannot be moved. The loading head must be moved to each filling spout on the vehicle. Depending on material properties and length of the vehicle, several mobile or articulated conveying units are available: These mobile conveying devices can be equipped with 1 or 2 loading heads according to the requirement. Mobile telescoping tube

Open the catalog to page 10

Cantilever double mobile articulated screw conveyor Mobile screw conveyor Single mobile articulated screw conveyor

Open the catalog to page 11

Mobile loading equipment for tanker vehicles Mobile screw conveyor Cantilever double mobile articulated screw conveyor Mobile airslide Single mobile articulated screw conveyor Single mobile articulated airslide

Open the catalog to page 12

Double mobile articulated screw conveyor Mobile hopper Mobile telescoping tube Double mobile articulated airslide

Open the catalog to page 13

Loading equipment for open vehicles For dust-free loading of open vehicles, various types of telescoping loading systems are available. At the start of the loading process, the head is lowered to the base of the vehicle and material feed is switched on. The unit is raised automatically by a filling level monitor located at the lower end of the conical valve which is dampened by the upward material. The bottom of the conical valve always re- mains on top of the material so that no dust can escape to the outside. The dust extraction bellows or telescoping tubes are connected to a central dust...

Open the catalog to page 14

Loading stations in standard design Combined loading head for tankers and open vehicles Capacity to approx. 250 m3/h When loading tanker vehicles, the conical valve with rubber apron is automatically secured in its uppermost position with 3 hooks. This type of loading head is not equipped with a sealing cone. The filling level monitor is firmly mounted underneath the outlet flange. ) Material inlet Dust extraction 900 m3/h Dust extraction 2 x 2.000 m3/h Bellows with telescoping tube Vibrator Conical seat Filling level monitor Dust hood Motor winch

Open the catalog to page 15

Loading stations in standard design Loading head I Capacity to approx. 300 m3/h This loading head is used for fine and lumpy material and can be connected to a dust extraction system for up to 6.000 m3/h. Material inlet Dust extraction 6.000 m3/h Bellows with telescoping tube Dust hood Filling level monitor Motor winch

Open the catalog to page 16