Catalogs >
BEUMER Group GmbH & Co. KG >
BEUMER high capacity belt bucket elevators

BEUMER high capacity belt bucket elevators
8Pages

Catalog excerpts

high capacity belt bucket elevators >

Quality and tradition BEUMER has established a leadingmarket position for the supply of bucket elevators and has done pioneer work in the field of high capacity bucket elevators. With the development of high quality, paten- ted steel cable belts, their endless connection methods and the appropriate bucket mountings, the conditions were created for today's generation of high capacity belt bucket elevators with heights above 150 m, which are capable of handling material flows of 1,700 m Bucket elevators for the mechani-cal, vertical transportion of materi- als have become a crucial link in...

Open the catalog to page 2

BEUMER high capacity belt bucket elevators - 3

The proven machine components ofthe BEUMER bucket elevator tech- nology are the basis of a high relia- bility and a trouble-free operation. Long service life Maximum reliability of operation The special connection between thebucket and belt reduces the wear of the belt to a minimum, thus avoi- ding the tearing out of the bucket during operation thereby ensuring a long service life and profitable operation of the machine. Conveying capacities of morethan 1,700 m Conveying heights over 150 m > 3 /h and center distances over 150 m are possible The belts are reinforced with steelwires, which...

Open the catalog to page 3

BEUMER high capacity belt bucket elevators - 4

The bucket elevator boot In the bucket elevator boot, the material is fed via theinlet chute directly into the buckets. Material missing the target is scooped out of the bucket elevator boot. The gravity type parallel tensioning device ensures perfect belt tracking and acts as a guide between belt and return pulley. The tension pulley is designed as a bar drum. Trickling material is removed by a double cone, which is arran- ged in the bar drum. In this way, circulating material cannot be caught between the belt and the pulley and belt damage is avoided. The bucket elevator head Besides the...

Open the catalog to page 4

BEUMER high capacity belt bucket elevators - 5

The bucket mounting The segments form a closed strip on the bucket back side, so that all forces acting on the belt are equal- ly distributed to the steel wires embedded in the belt, thus making it impossible for the buckets to be torn out of the belt. A rubber plate is vulcanized onto the belt in the bucket mountingarea. In this way, a direct contactof the material with the belt and the bucket is prevented and consequently any wear is avoi- ded. The segments on the back side ofthe belt are inserted with the belt and the rubber plate into the shaped plate of the bucket back wall, so that...

Open the catalog to page 5

BEUMER high capacity belt bucket elevators - 6

BEUMER belt clamping connection for steel wire belts In order to connect the bucket ele-vator belt ends permanently and safely, we developed the BEUMERbelt clamping connection. As shown on the cross section, the belt is clamped by means of bolts between a steel wedge and two aluminum clamping jaws. The num- ber of bolts depends on the belt width. The exposed and spliced cable ends are also cast with a soldering metal. At the points of contact with the clamping jaws, the belt ends are reinforced with additional layers of belting material. For belt bucket elevators with large center...

Open the catalog to page 6

BEUMER high capacity belt bucket elevators - 7

Bucket widthmm1602002503154005006308001.0001.2501.4001.6001.8002.000 Normal design AA = center distance 2x7002x8002x9002x1000 eLength of boot housingmm1.040 1.080 1.280 1.350 1.500 1.6501.8502.1002.5002.5002.5002.5002.5002.500fWidth of boot housingmm4004505005507008009301.1001.3501.6001.8002.0002.2002.400 gInlet height above AA <80m:mm1.3201.3201.4001.5001.6501.8501.9502.2002.3502.3502.3502.3502.3502.350floor level AA >=80m:mm1.6201.6201.7001.8001.9502.1502.2502.5002.6502.6502.6502.6502.6502.650hHeight of drive pulley above shaft...

Open the catalog to page 7

BEUMER high capacity belt bucket elevators - 8

We reserve the right to make changes without notification. 00 00 Օ GB 00/00 BEUMER Corporation BEUMER S.a.r.l. BEUMER Ltda. Australian Representative Office of BEUMER Asian Representative Office of BEUMER > Bridgewater, NJ/USA Phone:+1 7325608222 Fax:+1 7325630905 St. Ouen LגAumone/France Phone:+33(0)134642520 Fax:+33(0)130376883 Campinas - SP/BrazilPhone:+55(0)1932431700 Fax:+55(0)1932421411 Adelaide/South AustraliaPhone:+61(0)883568565, Fax:+61(0)883568705 Bangkok/ThailandPhone:+66(0)27317190, Fax:+66(0)27317194 size="-1">

Open the catalog to page 8