Group: Emerson Process Management
Catalog excerpts
Product Data Sheet Quarter-Turn Spring-Return (SR) and Double-Acting (DA) Pneumatic Actuators ■ Output Torques to 21,000 in-lb (2373 N-m) ■ Ductile Iron or Stainless-Steel Construction ■ Double-Acting and Spring-Return Models ■ High Cycle Life, High Speed, High Reliability BETTIS" EMERSON. Process Managemen
Open the catalog to page 1Product Data Sheet
Open the catalog to page 2Product Data Sheet RGS011110-6 Rev. 0 Operation and Piping Bettis RGS Q-Series actuators may be operated with instrument air, hydraulic fluid, water, or other power gases and fluids. Always ensure that the materials of construction are compatible with the application and that the pressure does not exceed the maximum allowable. All Bettis actuators are shipped in the Fail-Close or Left-Hand orientation unless ordered as Fail-Open or Right-Hand. The mode of operation may be reversed in the field simply by turning the actuator top-side down. 1. Fail-Close (Left-Hand): pressure on the end cap...
Open the catalog to page 3Bettis RGS Q-Series March 2016 Product Data Sheet Piping Guidelines 1. Dual cylinder models (205, 210, 214), both endcap pressure ports (P1 and P2) must be utilized for proper operation. 2. P1 and P2 are typically connected together and powered by a single air pathway. 3. Single Cylinder models (203, 204, 207, 212), port 2 (P2) does not exist. 4. Spring-Return (SR) models port 3 (P3) is a breather port. 5. P3 is a pressure port for Double-Acting models. 6. P3 is a breather port for single cylinder SR models.
Open the catalog to page 4Product Data Sheet
Open the catalog to page 5Bettis RGS Q-Series March 2016 Dimension and Technical Data Single Cylinder Models (203, 204, 207, 212) Product Data Sheet
Open the catalog to page 6Product Data Sheet RGS011110-6 Rev. 0 Dual Cylinder Models (205, 210, 214)
Open the catalog to page 7Product Data Sheet Dimension and Technical Data (Imperial, Inches) ENVELOPE DIMENSIONS Width Total Width Cylinder Height Cylinder Length Total Flange Distance Flange Depth* Stop Extension Maint. Clearance Maint. Clearance *On 203, 204, and 205 models , the cylinder flange is flush with the mounting surface. Thread depth Identical mounting patterns on both sides of actuator for all sizes. Size 203 has a single ISO pattern. Sizes 204/205 have two ISO patterns. Sizes 207/210/212/214 have an ISO pattern and a rectangular pattern. NAMUR PATTERN Slot Width Slot Depth Thread Depth The NAMUR...
Open the catalog to page 8Product Data Sheet ENVELOPE DIMENSIONS Width Total Width Cylinder Height Cylinder Length Total Flange Distance Flange Depth* Stop Extension Maint. Clearance Maint. Clearance *On 203, 204, and 205 models , the cylinder flange is flush with the mounting surface. Thread depth Identical mounting patterns on both sides of actuator for all sizes. Size 203 has a single ISO pattern. Sizes 204/205 have two ISO patterns. Sizes 207/210/212/214 have an ISO pattern and a rectangular pattern. NAMUR PATTERN Slot Width Slot Depth Thread Depth The NAMUR slotted drive can be moved to the opposite side for...
Open the catalog to page 9Product Data Sheet DOUBLE SQUARE FEMALE DRIVE Square Depth Outer Diameter Inner Diameter Identical double square female drive on both sides of the actuator for all sizes. AIR VOLUME cubic inches (cu in) 14 End Caps PORT SIZE (P1, P2, P3) STROKE TIME seconds (sec) *Stroke time varies with supply pressure, temperature, spring rate, travel adjustment, working medium, piping, accessory flow rates, and valve torque. Values shown with no valve resistance. CENTER OF GRAVITY COGx *CoGz is variable for some models and changes with actuator stroke. Values are shown as min/max. WEIGHT pounds (lb) QS -...
Open the catalog to page 10Product Data Sheet DOUBLE SQUARE FEMALE DRIVE Square Depth Outer Diameter Inner Diameter Identical double square female drive on both sides of the actuator for all sizes. AIR VOLUME cubic inches (cu in) 166 End Caps PORT SIZE (P1, P2, P3) STROKE TIME seconds (sec) *Stroke time varies with supply pressure, temperature, spring rate, travel adjustment, working medium, piping, accessory flow rates, and valve torque. Values shown with no valve resistance. CENTER OF GRAVITY COGx *CoGz is variable for some models and changes with actuator stroke. Values are shown as min/max. WEIGHT pounds (lb) QS...
Open the catalog to page 11Product Data Sheet Dimension and Technical Data (Metric, Millimeters) ENVELOPE DIMENSIONS Width Total Width Cylinder Height Cylinder Length Total Flange Distance Flange Depth* Stop Extension Maint. Clearance Maint. Clearance *On 203, 204, and 205 models , the cylinder flange is flush with the mounting surface. Thread depth Identical mounting patterns on both sides of actuator for all sizes. Size 203 has a single ISO pattern. Sizes 204/205 have two ISO patterns. Sizes 207/210/212/214 have an ISO pattern and a rectangular pattern. NAMUR PATTERN Slot Width Slot Depth Thread Depth The NAMUR...
Open the catalog to page 12Product Data Sheet ENVELOPE DIMENSIONS Width Total Width Cylinder Height Cylinder Length Total Flange Distance Flange Depth* Stop Extension Maint. Clearance Maint. Clearance *On 203, 204, and 205 models , the cylinder flange is flush with the mounting surface. Thread depth Identical mounting patterns on both sides of actuator for all sizes. Size 203 has a single ISO pattern. Sizes 204/205 have two ISO patterns. Sizes 207/210/212/214 have an ISO pattern and a rectangular pattern. NAMUR PATTERN Slot Width Slot Depth Thread Depth The NAMUR slotted drive can be moved to the opposite side for...
Open the catalog to page 13Product Data Sheet DOUBLE SQUARE FEMALE DRIVE Square Depth Outer Diameter Inner Diameter Identical double square female drive on both sides of the actuator for all sizes. End Caps PORT SIZE (P1, P2, P3) STROKE TIME seconds (sec) *Stroke time varies with supply pressure, temperature, spring rate, travel adjustment, working medium, piping, accessory flow rates, and valve torque. Values shown with no valve resistance. CENTER OF GRAVITY COGx *CoGz is variable for some models and changes with actuator stroke. Values are shown as min/max. WEIGHT kilograms (kg) QS - Stainless Environmental...
Open the catalog to page 14Product Data Sheet DOUBLE SQUARE FEMALE DRIVE Square Depth Outer Diameter Inner Diameter Identical double square female drive on both sides of the actuator for all sizes. End Caps PORT SIZE (P1, P2, P3) STROKE TIME seconds (sec) *Stroke time varies with supply pressure, temperature, spring rate, travel adjustment, working medium, piping, accessory flow rates, and valve torque. Values shown with no valve resistance. CENTER OF GRAVITY COGx *CoGz is variable for some models and changes with actuator stroke. Values are shown as min/max. WEIGHT kilograms (kg) QS - Stainless Environmental...
Open the catalog to page 15All BETTIS catalogs and technical brochures
-
LP-31: LP-Gas
118 Pages
-
RGS F-Series
34 Pages
-
TEC2
17 Pages
-
CW Series
2 Pages
-
AT Series
2 Pages
-
RPE-Serie
3 Pages
-
CBB-series
6 Pages
-
CBA-300
6 Pages
-
Q series
4 Pages
-
Pressurematic
6 Pages
-
GVO-series
20 Pages
-
Gas/Hydraulic
6 Pages
-
G-series
6 Pages
-
HD-series
6 Pages
Archived catalogs
-
Multiport Flow Selector
12 Pages
-
CBA-Series Pneumatic Actuators
16 Pages
-
Complete TorqPlus brochure
35 Pages