Rod Source Shielding
4Pages

{{requestButtons}}

Catalog excerpts

Rod Source Shielding - 1

Contactless Measurements with steel ikdl eful beam

Open the catalog to page 1
Rod Source Shielding - 2

lead cylinder which is tighly surroun- ded by a steel shell. A channel for the useful beam in the lead cylinder opens for an angle of approx. 10°. The cylinder can be rotated in a stable mounting frame. With a lever the cylinder can be turned by 90° facing an additional shielding in the frame to shield the useful beam of radiation during transport or for other internal reasons. The final positions „ON" and there is a cap screwed on, which is removed when installing the source. Within the shielding the rod source is guided in an additional pipe. Due to this installation the source is protec-...

Open the catalog to page 2
Rod Source Shielding - 3

done on a pedestal or bracked as near as possible to the surface of the contai- ner or the heat insulation. Further- more, on the left and the right side of the frame of the shielding a fence or perforated plates can be installed which protect against unintended rea- ching inside the useful beam of radia- tion. For measuring ranges of more than 1m a multiparted shielding is used, whereby the individual parts are screwed together. Each part should be supported on the side. For irregular container forms shieldings can also be arranged on an angle. Specially linked brackets can be delivered on...

Open the catalog to page 3
Rod Source Shielding - 4

Steel tube Mark Line ..RADIATION CHANNEL' Position „Closed" L y\ Name plate Sectional view X-X Position „Opened" Design modifications may occur without notice. BERTHOLD TECHNOLOGIES GmbH & Co. KG - P.O. Box 100 163 • D-75323 Bad Wildbad, Germany

Open the catalog to page 4

All Berthold Technologies Process Control catalogs and technical brochures

  1. Retrofit

    3 Pages

  2. MEVIS

    4 Pages

  3. Micro-Polar

    16 Pages