The Beam Loss Monitor - Bergoz Instrumentation - #1

/ 1


catalogue search
The Beam Loss Monitor - Bergoz Instrumentation
P. 01
Page:
The Beam Loss Monitor - Bergoz Instrumentation


See other catalogues for Bergoz Instrumentation

Text version of the page
This Beam Loss Monitor (BLM) is a new approach to measure and localize beam losses. Very small size and low unit cost make it possible to monitor all locations where beam loss is predicted. Vacuum quality around the storage ring can be measured based on BLM count rate. Two PIN-photodiodes mounted face-to-face detect charged particles. Coincidence counting make it insensitive to synchrotron radiation photons. Spurious count very low: 108 Recovers 100 ns after a hit Choice of detector solid angle: Large PIN-diodes can be user installed Output is a TTL compatible pulse: easy counting Tested successfully up to 108 Rads for hardness Specifications Single particle detection efficiency > 30% PIN-photodiode surface 7.34 mm2 Spurious count rate 10 MHz Count rate @ 6x105 Rad/yr SR photons » 100 Hz Same with 3 cm lead shielding » 1 Hz Output positive TTL 50W Cable driving capability > 200m RG213 Output female connector 10-pin HE10 Power supply + 5V 170 mA – 5V 80 mA + 24V 1 mA Size 69 x 34 x 18 mm Operating principle The charged particle crosses both PINdiodes, causing a coincidence. Synchrotron radiation photons, if stopped by either PIN-diode, do not cause a coincidence + Bias 100ìm Charged particle Photon £100ns Coincidence + Bias K. Wittenburg was awarded the Faraday Cup in 2000 for the design of the PINphotodiode Beam Loss Monitor and its implementation at HERA. Bergoz Instrumentation was granted a license by DESY to use Wittenburg's original development. Ordering code BLM Beam Loss Monitor Distributors U.S.A. : GMW Associates 955 Industrial Rd. San Carlos, CA 94070, U.S.A. Fax: (650) 802-8298 - Tel.: (650) 802-8292 sales@gmw.com www.gmw.com Japan : REPIC Corporation 28-3 Kita Otsuka 1-Chome Toshima-ku, Tokyo 170-0004, Japan Fax: 03-3918-5712 - Tel.: 03-3918-5326 sales@repic.co.jp www.repic.co.jp Manufacturer BERGOZ Instrumentation Espace Allondon Ouest 01630 Saint Genis Pouilly, France Fax: +33-450.426.643 - Tel.: +33-450.426.642 sales@bergoz.com www.bergoz.com bergoz Instrumentation v.2.5 BLM Beam Loss Monitor Largest dynamic range / lowest cost of any BLM

pageCatalog pdf di En 2012-05-22-28