Text version of the page

L1004D

WHEELED LOADER WHEELED LOADER Lower TotalMaximum Lift CapacityLift at Ground Level Lift at Maximum HeightSteering (conforms to SAE J1511)Type Articulation Angle/rear wheel steering angleTurning Radius (measuredto centerline of outside tyre) 4 sec (float down) / 3 sec (power down)9,9 secWith 1,3 m
3 (1.75 cu.yd) bucket with teeth6840 kg (15,075 lb) 4290 kg (9,450 lb)Power, fully hydraulic 56 degree arc (28 degrees each direction), plus 27 degree rear wheelsteering3,9 m (12 ft 10 in)3062 mm (10 ft)2823 mm (9 ft 3 in) 378 mm (1 ft 3 in)1150 mm (3 ft 9 in)2600 mm (8 ft 6 in) 2775 mm (9 ft)3675 mm (12 ft)915 mm (3 ft) 53 mm (2 in) 6395 mm (20 ft 11 in)56 degrees44 degrees45 degreesStockpiling and General Purpose w/Bolt-On Edge1,5 m DIMENSIONS WITH DIMENSIONS WITH BUCKET BUCKET A Height to Top of Caband Canopy B Height to Top of Exhaust C Ground Clearance D Length from Centerline toFront Axle E Wheelbase F Dump Height G Height to Hinge Pin,Fully Raised H Dump Reach at Full Height I Maximum Digging Depth J Overall Length K Maximum Rollback at Full Height L Bucket Dump at Full Height M Maximum Rollback at GroundLevel BUCKETS BUCKETS Bucket Type/SizeCapacity, Heaped SAE Bucket Width Breakout Force, SAE J732C Tipping Load, Straight Tipping Load, Full Turn, (30º) Turning Circle Radius (Bucket In Carry Position)Operating Weight
3 (2 cu.yd)2400 mm (7 ft 9 in) 72 kN (16 186 lbf) 5745 kg (12 666 lb) 5260 kg (11 596 lb)4565 mm (14 ft 11 in) 8510 kg (18 761 lb)Loader operating information is based on machine with all standardequipment, 17.5R25 tyres, ROPS cab, 79 kg (175 lb) operator, and full fuel tank. This information is affected by tyre size, ballast, and different attachments.