WHEELED LOADERS - Bergmann Maschinenbau - #4

/ 54


catalogue search
P. 01
P. 02
P. 03
P. 04
P. 05
P. 06
P. 07
P. 08
P. 09
P. 10
P. 11
P. 12
P. 13
P. 14
P. 15
P. 16
P. 17
P. 18
P. 19
P. 20
P. 21
P. 22
P. 23
P. 24
P. 25
P. 26
P. 27
P. 28
P. 29
P. 30
P. 31
P. 32
P. 33
P. 34
P. 35
P. 36
P. 37
P. 38
P. 39
P. 40
P. 41
P. 42
P. 43
P. 44
P. 45
P. 46
P. 47
P. 48
P. 49
P. 50


See other catalogues for Bergmann Maschinenbau
You may also be interested in

Dump truck


Text version of the page
L705D
'HEELED LOADER
DIMENSIONS WITH
PALLET FORK
569 mm (1 ft 10.4 in) 3191 mm (10 ft 5.6 in) 1531 mm (5 ft 0 in)
1361 mm (4 ft 5.6 in)
749 mm (2 ft 5.5 in) 35 mm (1.4 in) 1200 mm (47.2 in) 6139 mm (20 ft 1.7 in)
A Reach, Fully Raised
B Fork Height, Fully Raised
C Maximum Reach, Fork Level
D Fork Height, Maximum Reach
E Reach, Ground Level
F Depth Below Ground
G Tine Length
H Overall Length
QUICK-COUPLER PALLET
FORK INFORMATION
Tipping Load, Straight (fork level,
load centered on tine)
Tipping Load, Full Turn (fork level,
load centered on tine)
Operating Weight
3573 kg (7,877 lb) 3250 kg (7,165 lb)
5923 kg (13,058 lb)
Key: • Standard equipment Optional/special equipment
STANDARD/OPTIONAL EQUIPMENT
Electrical load center with blade-type fuses
Standard batteries (2), 12 volt with 850 CCA,
160-min. rated reserve
Master electrical disconnect switch
Alternator, 12 volts, 65 amps
Horn (conforms to SAE J994, J1446)
Lights (conform to SAE 99): Driving / Front working
(2) / Turn signals / Flashers / Stop / Taillights
Worklights, rear (2)
Reverse warning alarm (conforms to SAE J994, J1446)
Multifunction monitor with audible and visual warnings:
Low engine oil pressure / Engine coolant temperature / HST transmission oil temperature / Parking brake indicator / Gauges and indicators: Engine coolant temperature, fuel level, speedometer, clock, and hour meter
Indicator lights: Engine air filter / Fasten seat belt /Parking brake actuated / Forward/reverse travel / 1st or 2nd speed range / Turn signal and hazard
ENGINE
Meets EPA Tier II non-road emissions regulations Antifreeze, -34°F (-37°C) Coolant recovery tank Fan safety guard
Fan, suction type, hydraulically driven, proportional speed
Muffler, under hood with curved end exhaust stack Environmentally friendly engine oil drain Spin-on engine oil and fuel filter Engine oil cooler
Quick-release fuel filter and water separator Under-hood dual-element air cleaner with restriction indicator
Under-hood prescreened air intake with dust evacuator valve
Serpentine drive belt with automatic tensioner
ELECTRICAL
Starter switch with electric fuel cutoff 12-volt system

pageCatalog pdf di En 2012-02-07-15