| | | Drive.........Two axial piston motors with reduction gear. Brake...........A hydraulic brake that locks automatically when the swing control lever is in the neutral position and a mechanical parking brake which is applied when the safety lock lever is pulled backwards, the engine is turned off or the swing control lever is in the neutral position. Lubrication.........Completely housed and grease bathed Max. swing speed............................................9.1 min-1 Tail swing radius.............................................3,625 mm Min. front swing radius...................................4,860 mm | | Fuel tank.................................................................605 L Cooling system.........................................................49 L Engine oil..................................................................49 L Track drives........................................................2 x 21 L Swing drive.......................................................2 x 11.3 L Hydraulic oil tank (level)....................................................................329 L (system)................................................................610 L In standard figure, with the 3.45 m arm, 600 mm grouser shoes and 2.0 m3 (ISO) bucket. Operating weight..............................................46,200 kg Ground pressure..................................................82 kPa | | |
| | | Drive.............................Independent axial piston motor with reduction for each side Brakes............Independent disk parking brake for each side, applied automatically when the travel levers are in the neutral position. Track shoes...............................................51 each side Track adjustment ...Grease cylinders with recoil springs Lubrication............Sealed-for-life rollers and front idlers with floating seals Travel speed........................................High 0~5.0 km/h Medium 0~3.0 km/h Low 0~2.2 km/h Gradeability...............................................70 % (35 °C) Max. drawbar pull...............................................392 kN Ground clearance (less grouser bar)................700 mm Track length ...................................................5,260 mm | | |
| | | Boom cylinders................................Two, double acting Bore & Stroke............................180 mm x 1,683 mm Arm cylinder.....................................One, double acting Bore & Stroke............................190 mm x 1,990 mm Bucket cylinder................................One, double acting Bore & Stroke............................170 mm x 1,278 mm Lubrication .................Grease nipples, with centralized greasing for remote points | | |
| | | Bucket digging force...........................................247 kN (High power)...................................................276 kN Arm digging force...............................................184 kN (High power)...................................................216 kN | | |