Product overview Wood working aggregates - 18 Pages

Add to MyDirectIndustry favorites
Product overview Wood working aggregates

Catalog excerpts

BENZ GmbH Werkzeugsysteme Im Mühlegrün 12 77716 Haslach Tel. +49 . 7832 . 704 . 0 Fax +49 . 7832 . 704 . 21 www.benz-tools.de ... it´s your future! A MEMBER OF BENZ Inc. 8325 J, Arrowridge Blvd. Charlotte, NC 28273 Phone: +1 (704) 529 53 00 Fax +1 (704) 529 50 09 www.benz-inc.com

 Open the catalog to page 1

BENZ – it’s your future! BENZ, a member of the Zimmer Group, has been the leading supplier for over 20 years in aggregate tooling, acting as the connecting component between motor spindle and machining tool for the wood and metal industry. © All rights reserved. No reprints or copies allowed without the prior written consent of BENZ. Due to the continuing development of the product range we reserve the right to technical changes without further notice. We cannot assume liability for possible erroneous or incomplete descriptions. The Product Center Wood at BENZ offers solutions for all your...

 Open the catalog to page 2

In our efforts to support customers in their decision if they need an aggregate head and which one is the right choice for their application, the team members of BENZ have assembled some helpful information for you. Advantages of using an aggregate head versus a „standard„ motor spindle To put it in simple terms: An aggregate is a „rectangular“ gear box (with numerous variations). How often have you programmed your machining center to machine work pieces just to notice that it would be much more productive to use a tool in a horizontal position? A good example is the vertical milling of...

 Open the catalog to page 3

Basic Use and Application of aggregates MONO This aggregate head is equipped standard with a 90° angle. Applications: horizontal boring and drilling, routing and saw- ing (reduced gear ratio). e. g. anchor hole drilling, lock re- cess, formatting of countertops, vertical slot machining (back side). DUO This aggregate head is standard equipped with 2 tool outlets, each at a 90° angle. Application: horizontal boring, routing and sawing, e.g. po- cketing, grooving, slashing and sizing. QUATTRO This aggregate head is standard equipped with 4 tool outlets. Application: horizontal boring, (except...

 Open the catalog to page 4

The standard product lines X-line The X-line, with its new gear concept and the compact design equates to higher performance data and therefore higher efficiency. With slower heat development and extended lifetime this series was developed to withstand the toughest applications not only in hardwood but all other applications as well, and to ensure higher productivity. Advantages that speak for themselves: Excellent operating characteristics– minimal wear, long life time, under 80 db Extreme rigidity – higher precision during machining New lubricant type – lower temperature, longer cycle...

 Open the catalog to page 5

Technical data: Maximum rpm input: 10.000 1/min Maximum rpm output: 7.300 1/min Maximum torque input: 18 Nm Maximum torque output: 25 Nm Gear ratio: 1:0,73 Maximum temperature: 85°C/ 185 F Weight: approx. 4,5 kg Aggregate can be rotated 360° Maximum acceleration 120 1/s² This aggregate is available in three different lengths. X-line Single sided right angle head Type MONO with reduced rpm Application: Horizontal spindle outlet for vertical sawing, e.g. for sizing sheets of material, grooving. Please select your tool insert on page 32. The aggregate is available for all CNC machines. X-line...

 Open the catalog to page 6

X-line Corner notching unit Type FORTE Application: This aggregate, with its special spindle, was developed specifically for corner notching on inside corners. Technical data: Maximum rpm input: 12.500 1/min Maximum rpm output: 15.000 1/min Maximum torque n < 200 1/ min: 25 Nm Maximum torque n= 12.500 1/min: 10 Nm Gear ratio: 1:1,2 Maximum temperature: 85 ° C Weight: approx. 4 kg Aggregate can be rotated 360° Maximum acceleration 120 1/s² This aggregate is available for all CNC machines. X-line Single sided angle head Type FIX with fixed angle Application: Boring, drilling, routing and...

 Open the catalog to page 7

Compact Line Application: This aggregate, with its recessed spindle output is ideal for horizontal machining with long tools, where limited room in the x or y stroke would otherwise present a problem. X-line Application: This aggregate, with its recessed spindle output is ideal for horizontal machining with long tools, where limited room in the x or y stroke would otherwise present a problem, e.g. mortise lock machining on doors. Technical data: Maximum rpm input: 9.670 1/min Maximum rpm output: 12.000 1/min Maximum torque input: 20 Nm Maximum torque output: 16 Nm Gear ratio: 1:1,24 Maximum...

 Open the catalog to page 8

Compact Line Double sided angle head Type DUO Application: Horizontal spindle outputs for vertical sawing as well as horizontal boring and routing, (light duty sawing and drilling). Technical data: Maximum rpm input: 8.750 1/min Maximum rpm output: 12.000 1/min Maximum torque input: 20 Nm Maximum torque output: 15 Nm Gear ratio: 1:1,37 Maximum temperature: 85°C/ 185 F Weight: approx. 4 kg Aggregate can be rotated 360° Maximum acceleration 120 1/s² Please select your tool insert on page 32. The aggregate is available for all CNC machines. X-line Double sided angle head Type DUO Application:...

 Open the catalog to page 9

Technical data: Maximum rpm input: 8.750 1/min Maximum rpm output: 12.000 1/min Maximum torque input: 20 Nm Maximum torque output: 15 Nm Gear ratio: 1:1,37 Maximum temperature: 85°C/ 185 F Weight: approx. 4,5 kg Aggregate can be rotated 360° Maximum acceleration 120 1/s² Compact Line Four sided angle head Type QUATTRO Application: Horizontal boring. X-line Application: two drill spindles for heavy and two boring spindles for light applications, e.g. machining of entry doors on all four edges. Technical data: Maximum rpm input: 12.500 1/min Maximum rpm output: 15.000 1/min Maximum torque...

 Open the catalog to page 10

64 * 111 * 95 * 0 - 100° 70,5 150 * * 101,5 max. * R48,5 0 - 100° 0 - 100° Please select your tool insert on page 32. The aggregate is available for all CNC machines. Compact Line Application: Drilling/Boring, routing and sawing at any angle. The A-axis is manually adjustable from 0° to +100°, e.g. for any and all angled machining. X-line Application: Drilling/Boring, routing and sawing at any angle. The A-axis is manually adjustable from -100° to +100°, e.g. for any and all angled machining. Technical data: Maximum rpm input: 12.000 1/min Maximum rpm output: 12.000 1/min Maximum torque: 15...

 Open the catalog to page 11

All BENZ GmbH Werkzeugsysteme catalogs and technical brochures

  1. FLEX D

    1 Pages

  2. POLO

    1 Pages

  3. POLO F

    1 Pages

  4. EXCHANGEABLE UNITS

    124 Pages

  5. Angle Heads

    47 Pages

Archived catalogs

  1. Live Tools Catalog

    116 Pages