BM_Workholding Systems and Accessories - 176 Pages

Add to MyDirectIndustry favorites
BM_Workholding Systems and Accessories

Catalog excerpts

Workholding Systems

 Open the catalog to page 1

Content Technical information CNC-Drill chucks Adapter sleeves MK (for morse taper and flat tank) Adapter sleeves MK (for morse taper with draw thread) Tapping head quick-change Synchro-tapping chuck Boring bar-blanks Adapter sleeves (Weldon) Adapter sleeves (Whistle-Notch) Adapter sleeves (Weldon) slim design Extensions for shrink fit chucks Presetting adapter Manual for presetting adapter Hydraulic expansion chucks Reducing collets sealed Milling machine arbors DIN 6358 Milling machine arbors DIN 6357 Test arbors in wooden box © 09/2008, BENZ GmbH Werkzeugsysteme. All rights reserved. No...

 Open the catalog to page 2

Technical Information HSK - A+C ISO 12164 for automatic and manual tool change Material: Alloyed case hardened steel, tensile strength in the core min. 800 N/mm2 Execution: Case hardened HRc 58±2, depth of case 0,6 - 0,8 mm, browned Accuracy: Run out between cone and holding part < 5 u

 Open the catalog to page 4

For RH and LH drilling, without internal cooling system HSK-A Clamping range D L Integral drill chucks with high clamping force Difference to concentric running: max. 0,03 mm Short design Without internal cooling system For RH and LH drilling, with internal cooling system HSK-A Clamping range D L x 1 Integral drill chucks with high clamping force Difference to concentric running: max. 0,03 mm Short design With internal cooling system

 Open the catalog to page 5

Female Taper Application: To hold tools with HSK shank for manual clamping Delivery content: With built-in clamping element Female Taper Application: To hold tools with HSK shank for manual clamping Delivery content: With built-in clamping element

 Open the catalog to page 6

Adapter sleeves for morse taper shanks Related to DIN 6383, to hold tools with morse taper and Application: To hold tools with morse taper and flat tang DIN 228 B HSK-A MK x, d, Order-no. Form A+C

 Open the catalog to page 7

Adapter sleeves for morse taper shanks Related to DIN 6364, to hold tools with morse taper DIN 228 A with draw thread To hold tools with morse taper DIN 228A draw thread Delivery content: With built-in draw screw Note: The versions marked with * are provided with drive flats to DIN 2201.

 Open the catalog to page 8

Tapping head quick-change With lenght compensation in compression and tension, without internal cooling system HSK-A Screw tap Linear compensation d, d2 x, Order-no. Compression Tension

 Open the catalog to page 9

Tapping head quick-change Without lenght compensation in compression and tension, with internal cooling system HSK-A Screw tap Linear compensation d, d2 Order-no. Compression Tension

 Open the catalog to page 10

Tapping head quick-change With lenght compensation in compression and tension, with internal cooling system Linear compensation Compression Tension / // \Werkze ugsysteme

 Open the catalog to page 11

With safety coupling

 Open the catalog to page 12

With safety coupling Size Screw tap D d I, Shank 0 □ Order-no.

 Open the catalog to page 13

Quick-change inserts SE Without safety coupling

 Open the catalog to page 14

Without safety coupling Size Screw tap D d ^ Shank 0 □ Order-no.

 Open the catalog to page 15

Synchro-Tapping chuck Increase of tool life with modern tapping chuck Modern CNC machining centres increasingly use rigid chucks for tapping operations. The continuous-path control shows slight synchronisation errors which results in a higher wear of thread flutes. The new syn- chro-tapping chuck, developed by BENZ, compensates these pitch errors and increases the tapping tool life Weldon/ Whistle-Notch-Shank

 Open the catalog to page 16

Boring bar-blanks For making special tools Taper and collar hardened and ground. Shank d1 unhardened, turned for further machining

 Open the catalog to page 17

Collet chucks 8° type ER Application: To hold tools with parallel shank in collets DIN 6499 Delivery content: Collet chuck with collet nut and adjusting screw HSK-A Type Clamping Range d1 x1 Order-no. Form A+C

 Open the catalog to page 18

Collet chucks 8° type ER HSK-A Type Clamping Range d1 x1 Order-no. Form A+C

 Open the catalog to page 19

Application: To hold tools with parallel shank in collets DIN 6388 Delivery content: Collet chuck with collet nut and adjusting screw HSK-A Type Clamping range d1 x1 Order-no. Form A+C

 Open the catalog to page 20

For parallel shank DIN 1835 B (Weldon) d2 Application: For clamping tools with parallel shank DIN 1835 Form B Delivery content: Weldon end mill adapter incl. locking screw

 Open the catalog to page 21

For parallel shank DIN 1835 B (Weldon) HSK-A d, d2 x, Order-no. Form A+C For parallel shank DIN 1835 B (Weldon) Application: For clamping tools with parallel shank DIN 1835 Form B Delivery content: Weldon end mill adapter incl. locking screw

 Open the catalog to page 22

For parallel shank DIN 1835 B (Weldon) HSK-A d, d2 x, Order-no. Form A+C

 Open the catalog to page 23

For parallel shank DIN 1835 B (Weldon) Application: For clamping tools with parallel shank DIN 1835 Form B Delivery content: Weldon end mill adapter incl. locking screw HSK-A d, d2 x, Order-no. Form A+C

 Open the catalog to page 24

For parallel shank DIN 1835 B (Weldon) HSK-A d, d2 x, Order-no. Form A+C

 Open the catalog to page 25

For parallel shanks DIN 1835 E (Whistle-Notch) For clamping tools with parallel shank DIN 1835 Form E Delivery content: Whistle-Notch end mill adapter incl. locking screw and adjusting screw HSK-A d, d2 x, Order-no. Form A+C

 Open the catalog to page 26

For parallel shanks DIN 1835 E (Whistle-Notch) HSK-A d, d2 x, Order-no. Form A+C For parallel shanks DIN 1835 E (Whistle-Notch) HSK-A d, d2 x, Order-no. Form A+C

 Open the catalog to page 27

For parallel shanks DIN 1835 E (Whistle-Notch) d2 For clamping tools with parallel shank DIN 1835 Form E Delivery content: Whistle-Notch end mill adapter incl. locking screw and adjusting screw

 Open the catalog to page 28

For parallel shanks DIN 1835 E (Whistle-Notch) HSK-A d, d2 x, Order-no. Form A+C

 Open the catalog to page 29

slim design For parallel shank DIN 1835 B (Weldon) For clamping tools with parallel shank DIN 1835 Form B HSK-A63DiN/iso 12164 Delivery content: Weldon end mill adapter incl. locking screw HSK-A d, x, d2 d3 Order-no. Form A+C

 Open the catalog to page 30

slim design For parallel shank DIN 1835 B (Weldon) HSK-A d, x, d2 d3 Order-no. Form A+C

 Open the catalog to page 31

slim design For parallel shank DIN 1835 B (Weldon) HSK-A d, x, d2 d3 Order-no. Form A+C

 Open the catalog to page 32

HSK-A d, d2 d3 x, x2 Order-no. Form A+C

 Open the catalog to page 33

HSK-A d, d2 d3 x, x2 Order-no. Form A+C

 Open the catalog to page 34

HSK-A d, d2 d3 x, x2 Order-no. Form A+C

 Open the catalog to page 35

HSK-A d, d2 d3 x, x2 Order-no. Form A+C

 Open the catalog to page 36

HSK-A d, d2 d3 x, x2 Order-no. Form A+C

 Open the catalog to page 37

Extensions for shrink fit chucks To extend and reduce to minor diameters Delivery content: At Ød1 from 3 to 5 mm without adjusting screw and at Ø d1 ex 6 mm with adjusting screw

 Open the catalog to page 38

All BENZ GmbH Werkzeugsysteme catalogs and technical brochures

  1. FLEX D

    1 Pages

  2. POLO

    1 Pages

  3. POLO F

    1 Pages

  4. EXCHANGEABLE UNITS

    124 Pages

  5. Angle Heads

    47 Pages

Archived catalogs

  1. Live Tools Catalog

    116 Pages