Axeda Supervisor

Software for the visualization of data from BENDER systems Product description Axeda Supervisor is a powerful software for the visualization of BENDER systems utilizing a BMS interface via gateways on a standard PC. For this purpose, the professional computers are equipped with a Runtime version of the Axeda Supervisor software. Suitable gateways are FTC470XET, FTC470XMB and the BMS OPC server. Axeda Supervisor runs under the operating systems Windows NT, Windows 2000 und Windows XP Professional.There are different versions of Axeda Supervisor available:• Demo version • System Integrator Kit with a two-hour development time• Development versions for 100, 300, 500, 2000,10000 and 65000 tags• Runtime versions for 100, 300, 500, 2000,10000 and 65000 tags The version is determined via a dongle for USB or the parallel port.It can also be run on a Touch Panel. Communication structure Suitable data sources are BENDER gateways FTC470XET, FTC470XMB and the BMS OPC server.
Axeda Supervisor FTC470XET: Device features Alarms and measured values from BENDER systems are passed to the internal OPC server which makes them available as OPC items. The software Axeda Supervisor installed on the PC contains an OPC client which receives the data from the OPC server. The graphics module of Axeda Supervisor allows application-specific data representation. • Easy representation of BENDER monito-ring systems on standard computers (PC) • Application-specific data representation• Presentation in website format• Extensive alarm handling• Alarm lists, history memory, diagrams • Service provision:customer-specific programming FTC470XMB: Alarms and measured values from BENDER systems are converted into a Modbus RTU protocol and are stored in the registers of the FTC470XMB. In this way, one FTC470XMB can display data of 10 BMS-capable BENDER devices.The software Axeda Supervisor installed on the PC contains a Modbus RTU driver which, as a Modbus master, is capable of reading out data from the respective registers of the FTC470XMB. The graphics module of Axeda Supervisor allows application-specific data representation. BMS OPC server:
1.8.5 The BMS OPC server is installed on a PC as software and connected to the BENDERsystem via the DI-2 interface industrial converter. Controlled by a configuration file, the OPC server only provides alarms from the external bus of the BENDER system as OPC items. The software Axeda Supervisor installed on the PC contains an OPC client which receives the data from the OPC server. The graphics module of Axeda Supervisor allows application- specific data representation.
150 Main catalogue part 1 – 08.2007/Insulation monitoring