TMX-HAoperator panel

Alarm indicator and operator panel for manual/automatic operation of changeover equipment of the UMC…-HA und USC…-HA series Product description The TMX-HA alarm indicator and operator panel is used to select manual or automatic operating mode at the changeover equipment UMC…-HA or the control module USC…- HA. The panel is recommended to be installed in the professional cabinet door of the distribution board incorporating the changeover equipment. By means of a toggle switching manual or automatic mode can be selected. Indicator lights show the respective operating mode. In the manual mode, the respective line is switched on via the buttons On/Off. An additional indicator light “Fault/manual mode” is built-in to signal faults in the changeover equipment. The other indicator lights are designed to indicate the current operating condition of Line 1 and Line 2. Functions • Toggle switch for manual/automatic changeover • On/Off button for Line 1 and Line 2 in manual mode • Indicator light “Fault/Manual mode” lights up on the occurrence of a fault in the change over module equipment or indicates manual mode.• Indicator light “Automatic” lights up in case of automatic mode. • Two green “On” indicator lights for Line 1 and Line 2 alternatively: “K1 On”, “K2 On”or “Q1 On”, “Q2 On”• Two green indicator lights “Voltage present” or “AV voltage present” “UPS voltage present”; alternatively two red indicator lights for “Q1 triggered” and “Q2 triggered” for use in conjunction with circuit breakers.
2.1 TMX-HA Device features • Front plate made of anodized aluminium • Indicator lights for Line 1/2: On, Automatic, Fault/Manual mode• Indicator lights for Line 1/2: voltage present, alternatively: industrial circuit breaker Q1/Q2 triggered• Pushbutton On/Off Line 1/2 • Engraved block diagram • Toggle switch for manual/automatic changeover
36 Main catalogue part 2 – 05.2008/Hospital engineering