bema 35 Dual - Bema - (Version JPG) - PDF Catalogue | Technical Documentation

Basic configuration

■ Machine casing stable and rigid construction (side panels are made from 8 mm steel plate)

■ Working widths 2050 mm, 2300 mm, 2600 mm and 2850 mm (size over 2300 mm is made with 2 Gerotormotors)

■ Main brush 0 660 mm spiral form serial steel/PPN, gives you aggressive cleaning and longer life.

Either PPN (polypropylene) or special brush for snow Infinitely adjustable with the adjusment wheel

■ Hydraulic drive powerful Gerotormotor (industrial quality) integrated into the cleaning brush. Large cross section of hydraulic oil pipes and hoses.

Integrated function hydraulic module contains the following functions: pressure release valve, run on safety valve, flow switching valve for collector, connection for side brush. - service free -

Optional extra equipment

Wheel loader attachment quick change adaptor with roller levelling

- service free -

Forklift attachment with roller levelling and quick clamps

- service free -

Tractor front linkage attachment including roll level adjustment; Euro-normed quick action attachment or three-point attachment for older front loaders - service free -

Tractor mounted front power lifter with oscillation power compensation, three-point attachment or collection inquick action triangle mode

- service free -

Tractor rear with auto level, including three-point mount

Unimog-Truck lift attachment for universal winter service plate with wheel controlled vertical lifting an d wheel levelling (in upper position self arresting). The hydraulic cylinder is mounted suspended cardanially and free floating

Hydraulic swivelling (double hydraulic circuit is necessary)

Water spray system (The fine water spray system sprays directly into the brush which increases the effectiveness and uses considerably less water). 240 ltr. water tank with internal filter and electric pressure pump (12/24 volt), spray pipe with flat spray jets. All water related parts are made from synthetic material to avoid corrosion.

Hydraulic connector SVK size 3

Hydraulic opening waste collection container with a large volume and a support wheel 0 250 x 80 mm (railsafe) for optimal ground contour following. The dual system means you only have to raise the collector to free sweep.

Super-Elastic wheels 0 250 x 80 mm (railsafe) with vulcanized elastic rubber, dust-proof, greasable roller bearings, reinforced forks and double-hardened rim bearings

Hydraulic rotary side brush 0600 mm (may be raised and returns automatically to machine centre point), automatic side and height adaption, incl. stop valve - switchable -Either PPN (polypropylene), steel/PPN or flat steel wire set

Water spray system for rotary side brush with flat spray jet, incl. stop valve - switchable -

Mechanical drive incl. drive shaft

Flow regulation valve for carrying vehicles with an hydraulic output of more than 80 ltr/min.

Lighting system (necessary if used on public roads)

Swivelling mechanically Parking supports (sides) with quick locking Loading loops with large openings Series paint finish orange RAL 2011 CE certification and operating manual

Flag holder and warning marks

Special paint finish

Special construction on request

Technical data


Machine type	bema 35 Dual 2050	bema 35 Dual 2300	bema 35 Dual 2600	bema 35 Dual 2850
Hydraulic drive	1 Gerotormotor (industrial quality)		2 Gerotormotor (industrial quality)
max. operating pressure	180 bar
min. fluid throughput	40 ltr./min		80 ltr./min
Working width	2050 mm	2300 mm	2600 mm	2850 mm
Collector capacity	approx. 390 ltr.	approx. 440 ltr.	approx. 490 ltr.	approx. 540 ltr.
Machine weight without extras	approx. 670 kg	approx. 695 kg	approx. 725 kg	approx. 750 kg
Main brush	Spiral set brush 0 660 mm PPN (polypropylene) or steel/PPN
Brush revolutions	recommended 100 rpm - max. 150 rpm
Rotary side brush	0 600 mm, hydraulically powered (oil flow in series with the main brush)
Side brush type	PPN (polypropylene), steel/PPN or flat steel wire set
Water spray system	240 ltr. water tank, tank filter and 12/24 Volt pump

Cleaning brush 0 660 mm

bema reserve the right to change the technical data at any time.

Your bema Fartner:

Attaches to:

C E

o o

Wheel loader Unimog-Truck Forklifts Tractors

Special vehicles

Our company is certified

^•J bema GmbH

Maschinenfabrik

"A clean

product line"

H Maschinenfabrik

We do not accept liability for printing errors!

DIN EN ISO 9001 : 2000 QA-Nr.: 04100 20040675

DIN EN ISO 9001:2000

www.kehrmasehine.de

□

bema 35 Dual - Bema - #1

Street sweeper, Snow-plow, Sweeper