Copying unit for Screen Printing BELTROCOP S Application: BELTROCOP S, suitable for all kinds of templates. Self-supporting all-steel model. Rubber cover with extremely hard surface with 2 or 4 exhaust nozzles (depending on size). Upper frame supported by gas springs for quick-acting closure with a crystal glass pane free from reams. Lower part with 3 easy-to-pullout racks. Racks arched inside and designed so that the screens are only laid on the outside edges. Racks with nettle cloth prevent liquid dripping onto the screens underneath. The rack compartment can also be equipped as a drying cabinet. Well arranged control panel with vacuum gauge, vacuum reducing valve, operating and control elements. High-performance vacuum pump. The electric control units can be easily monitored on a control panel and facilitate easy maintenance. Standard voltage 400 V/50 Hz Technical Data: Standard models: : Art.Nr. 52.053 52.054 52.055 52.056 Description BELTROLUX 3000 D BELTROLUX 5000 D Description Lamp fixture with hand winch and stop Protective curtain with fixture for BELTROCOP S B3 Protective curtain with fixture for BELTROCOP S B2 Protective curtain with fixture for BELTROCOP S B1 Protective curtain with fixture for BELTROCOP S A0 Semi-automatic running, only vacuum and exposure time to be preset and upper frame closed manually - afterwards it runs automatically Insertion lamp, yellow Extra charge for equipping as drying cabinet Extra charge for a further rack Control computer BELTROMAT 815 / Control computer BELTROMAT 8100