B1FE R1
4Pages

Catalog excerpts

FOR POTABLE WATER BOOSTER AND FILTERED EFFLUENT SERVICE MULTI-STAGE, BOTTOM-INLET, HIGH HEAD SUBMERSIBLES

Bell & Gossett Wastewater FEATURES Casing: AISI 304 SS. Corrosion resistant, non-toxic, non-leaching. Impeller: FDA compliant, glass filled Noryl®. Corrosion and abrasion resistant. • Maximum suspended solids 1⁄8" Mechanical Seal: Silicon carbide sealing faces; all metal components of AISI type 300 stainless steel running in protected oil chamber. • Total heads: to 145 feet TDH Elastomers: BUNA-N. • 11⁄4" NPT discharge and open suction • Capacities: to 37 U.S. GPM • Temperature: 104ºF (40ºC) continuous 140ºF (60ºC) intermittent. Motor Shell and Lifting Handle: Constructed of AISI type 304...

Open the catalog to page 2

Bell & Gossett Wastewater METERS FEET 180 TOTAL DYNAMIC HEAD MODEL INFORMATION Model Maximum Minimum Power “L” Discharge Weight Dimension No. HP Volts Stages Amps. Circuit Phase RPM Cord Breaker Connection (lbs.) (in.) 1FE160511 115 9.0 15 1FE260511 10' 16 AWG ½ 3 1 3450 1¼" NPT 28 19.8" w/bare leads 1FE160512 230 4.5 10 1FE260512 NPT 11⁄4

Open the catalog to page 3

TYPICAL SPECIFICATIONS The contractor shall furnish and install quantity _____ , Model 1FE __________ submersible effluent pump(s) as illustrated on the plans and in accordance with the following specifications. Single-phase models are available in ½ HP/115 or 230V. All single phase units are supplied with 10' power cords with bare leads. They feature built-in capacitors and automatic reset, on-winding overload protection. The air-filled, PSC Type, Class F insulated motors can be operated continuously without damage. Upper and lower sleeve bearings are Urethane. Water intrusion shall be...

Open the catalog to page 4