Water separator (Flange) - BEKO TECHNOLOGIES - #4

Content: Introduction ................................ 4

Guarantee ................................. 4

Safety rules ................................ 4

Areas of application ..................... 5

Function .................................... 5

Pressure Vessel Ordinance ............. 5

Installation ................................. 5

Technical data ............................ 10

These instructions for installation and operation will help you to become more familiar with the CLEARPOINT and enable you to utilize the device within the intended scope of application. Further­more, the instructions contain important informa­tion for ensuring safe, correct and economic op­eration.

The individual directions have to be followed pre­cisely as described in order to avoid hazards or da­mage. Additionally, it will be necessary to observe the accident prevention regulations valid in the ope­rator's country and at the place of installation to­gether with the approved rules of engineering prac­tice concerning correct safety and work procedures.

All persons carrying out the installation, commissio­ning, maintenance or repair of the product on the operator's premises must have read and under­stood these instructions for installation and opera­tion. The instructions should be permanently avail­able at the place of installation.

CLEARPOINT water separators are built accord­ing to the state of the art and the approved safety rules of engineering practice. However, the use of the product can endanger the health & life of at­tending personnel or third parties and can have a considerable negative effect on the product itself or on other material assets if:

- the personnel is not properly trained,

- the product is used for purposes other than

the intended application,

- the device is not correctly serviced or main tained.

This can render the guarantee invalid.

CLEARPOINT devices are designed for gaseous neutral media without any aggressive substances. Non-observance of this condition excludes all liabil­ity claims.

In the interest of further development,

BEKO TECHNOLOGIES reserves the right to im­plement changes at any time, while retaining the essential features of the device, if such changes become necessary to enhance the technical ca­pacity of the device or for reasons of safety or stand­ard commercial practice.

• The personnel carrying out the installation, com­missioning, maintenance or repair of the device must be properly qualified for this type ofwork. In particular, the persons concerned must

- be suitably trained and familiar with handling compressed-air systems besides being in formed about the associated dangers,

- know the content of the relevant instructions for installation and operation, and

- possess vocational qualifications or entitle ments in this particular field ofwork.

• Before the start of any work, the housing must first be depressurized.

• In the case of CLEARPOINT water separators