Threaded filter (S040-M032) - BEKO TECHNOLOGIES - #7

Text version of the page

Areas of application CLEARPOINT filters are designed for the separation of solid particles, aerosols, oil vapours and odours from non-aggressive compressed air or industrial gases. Depending on the specific application, the filter housings are provided with different inserts: C Coarse filter for the separation of coarse solid matter pollutants up to 25 µm. englishSafety rules G General purpose filter element for the separation of large dirt particles up to 5 µm. F Fine filter element for the separation of liquids up to 0.1 mg/m³ and solid particles up to 1 µm. • The personnel carrying out the installation, commis-sioning, maintenance or repair of the device must be properly qualified for this type of work. In particular, the persons concerned must - be suitably trained and familiar with handling compressed-air systems besides being informed about the associated dangers, - know the content of the relevant instructions for installation and operation, and - prossess vocational qualifications or entitlements in this particular field of work. • Before the start of any work, the housing must first be depressurized. • In the case of CLEARPOINT filters with BEKOMAT all the rules of the separate instructions need to be complied with. • To ensure safe functioning, only use the device within the operational limits (operating pressure, operating temperature, volumetric flow, material stability).• Where a BEKOMAT is installed, it must be ensured that the device is designed for the stated volumetric flow of compressed air or gas. Condensate surges into the device can impair the function.• In the event of leaks, shut off the compressed-air supply immediately and eliminate the cause in order to maintain safe and cost-effective operation. • CLEARPOINT filters, including accessories, must be checked once a week. This applies in particular to the function of the separator. S Super fine filter element for the separation of liquids up to 0.01 mg/m³ and solid particles up to 0.01 µm. N Nano filter element for the separation of liquids up to 0,001 mg/m³ and solid particles up to 0,01 µm. A Activated carbon filter elements for the separation of oil vapours up to 0.003 mg/m³ and odours . R(x) Dust filter for the separation of solid particles, fineness from C to N Max. operating pressure: to 16 barMax. operating temperature: +2 °C to +60 °C Recommended operating temperature: C, G, F, S, N: +2 °C ... +40 °C A: +2 °C ... +30 °C R(x): +2 °C ... +60 °C
CLEARPOINT S040 - M032 7