Flange filter (L080-L306) - BEKO TECHNOLOGIES - #7

Text version of the page

Areas of application C Coarse filter for the separation of coarse solidmatter pollutants up to 25 µm. CLEARPOINT filters are designed for the separationof solid particles, aerosols, oil vapours and odours from non-aggressive compressed air or industrial gases. Depending on the specific application, the housings are provided with different inserts: G General purpose filter element for the separationof large dirt particles up to 5 µm. F Fine filter element for the separation of liquids upto 0.1 mg/m³ and solid particles up to 1 µm. S Super filter element for the separation of liquidsup to 0.01 mg/m³ and solid particles up to 0.01 µm. A Activated carbon filter elements for the sepa-ration of oil vapours and odours up to 0.003 mg/m³.Max. operating pressure:to 10 bar Max. operating temperature:+2 °C to +60 °C Recommended operating temperature: C, G, F, S : >2<40 °C A : >2<30 °C Activated carbon filter A The flow through the activated carbon bed proceeds from the inside to the outside. Oil vapours and odours are adsorbed on the activated carbon. The carbon is incorporated into a binding fabric which ensures the reliable retention of dust particles. Function Filter C, G, F and S Solid particles are separated by impact and inertia effect, oil and water aerosols by coalescence effect. Due to gravity, filtered out liquid particles gather in the lower part of the filter housing from where they are discharged either manually or automatically. With coalescence filters the direction of flow through the filter element is from the inside to the outside; with dust filters the flow moves from outside to the inside.
english Safety rules •The personnel carrying out the installation, com-missioning, maintenance or repair of the device must be properly qualified for this type of work. In particular, the persons concerned must-be suitably trained and familiar with handlingcompressed-air systems besides being informed about the associated dangers,-know the content of the relevant instructions forinstallation and operation, and-possess vocational qualifications or entitlementsin this particular field of work.•Before the start of any work, the housing must firstbe depressurized.•In the case of CLEARPOINT filters with BEKOMATall the rules of the separate instructions need to be complied with.•To ensure safe functioning, only use the devicewithin the operational limits (operating pressure, operating temperature, volumetric flow, material stability).•Where a BEKOMAT is installed, it must be en-sured that the device is designed for the stated volumetric flow of compressed air or gas. Con- densate surges into the device can impair the func- tion.•In the event of leaks, shut off the compressed-airsupply immediately and eliminate the cause in order to maintain safe and cost-effective opera- tion.•CLEARPOINT filters, including accessories, mustbe checked once a week. This applies in particu- lar to the function of the separator.
CLEARPOINT L080 - L306 7