Flange filter (L080-L306) - BEKO TECHNOLOGIES - #6

Content: Introduction ................................ 6

Guarantee ................................. 6

Safety rules ................................ 7

Areas of application ..................... 7

Function .................................... 7

Economic efficiency of filters .......... 8

Pressure Vessel Ordinance ............. 8

Installation ................................. 8

Filter element replacement ............. 9

Accessories................................. 9

Technical data ............................ 18

Dimensions ................................ 19

Mounting accessories ................... 20

Maintenance schedule ................. 21

These instructions for installation and operation will help you to become more familiar with the CLEARPOINT and enable you to utilize the device within the intended scope of application. Furthermore, the instructions contain important information for ensuring safe, correct and economic operation.

The individual directions have to be followed pre­cisely as described in order to avoid hazards or da­mage. Additionally, it will be necessary to observe the accident prevention regulations valid in the ope­rator's country and at the place of installation together with the approved rules of engineering practice con­cerning correct safety and work procedures.

All persons carrying out the installation, commissio­ning, maintenance or repair of the product on the operator's premises must have read and understood these instructions for installation and operation. The instructions should be permanently available at the place of installation.

CLEARPOINT filters are built according to the state of the art and the approved safety rules of enginee­ring practice. However, the use of the product can endanger the health & life of attending personnel or third parties and can have a considerable negative effect on the product itself or on other material assets if:

- the personnel is not properly trained,

- the product is used for purposes other than the intended application,

- the device is not correctly serviced or main tained.

This can render the guarantee invalid.

CLEARPOINT devices are designed for gaseous neu­tral media without any aggressive substances. Non-observance of this condition excludes all liability claims.

In the interest of further development, BEKO TECHNOLOGIES reserves the right to imple­ment changes at any time, while retaining the essen­tial features of the device, if such changes become necessary to enhance the technical capacity of the device or for reasons of safety or standard commer­cial practice.

6